Hood Sensor
Description
Hood sensor
1.
Prepare the computer for disassembly
2.
Remove the rear I/O panel
3.
Remove the mounting bracket cover
4.
Remove the display head back panel
5.
Remove the display head from the stand
on page
6.
Remove the rear metal cover
7.
Disconnect the cable from the system board connector labeled HSENSE (1).
8.
Remove the cable from the clip on top of the serial port board (2).
104 Chapter 8 Removal and Replacement Procedures
(Rear I/O Panel on page
90).
(Rear Metal Plate (EMI shield) on page
(Preparation for Disassembly on page
49).
(Mounting Bracket Cover on page
(Display Head Back Panel on page
(Removing the Display Head from the Stand
Spare part number
702772-001
46).
53).
54).
91).