Optional Integrated USB Modules
There are three optional integrated USB modules available from HP (sold separately).
1
retail integrated webcam for live video functions
2
retail integrated fingerprint reader to add security identification functions
3
retail integrated dual-head magnetic stripe reader for card data read
The integrated USB modules can be installed on the top or bottom of the display head or on either
side of the display head.
NOTE:
If you are installing a webcam, do not install it on the sides of the display head. The webcam
must be installed on top of the display head for proper video orientation.
NOTE:
These USB ports only support the USB modules listed above. They do not support optical
drives or hard drives.
The procedure for installing an integrated USB module is the same for all modules. To install a USB
module:
1.
Prepare the computer for disassembly
2.
Remove the rear I/O panel
3.
Remove the display head back panel
(Preparation for Disassembly on page
(Rear I/O Panel on page
49).
(Display Head Back Panel on page
695661-001
690684-001
690685-001
46).
54).
Optional Integrated USB Modules
63