Hard Drive - HP RP7 Model 7800 Maintenance And Service Manual

Hard Drive

Description
320 GB, 7200 rpm SATA hard drive
256 GB Solid State Drive (SSD)
128 GB Solid State Drive (SSD)
32 GB MLC Flash, 2.5-in
Grommet, hard drive
CAUTION:
you can transfer the data to the new drive.
1. Prepare the computer for disassembly
2. Remove the rear I/O panel
3. Remove the display head back panel
4. Open the hard drive door (1), then grasp the pull tab on the side of the hard drive and pull the
hard drive out of the drive bay (2).
86 Chapter 8 Removal and Replacement Procedures
If you are replacing a hard drive, be sure to back up the data from the old drive so that
(Rear I/O Panel on page
(Preparation for Disassembly on page
49).
(Display Head Back Panel on page
Spare part number
639135-001
661842-001
665961-001
686616-001
594220-001
46).
54).