Related Manuals for Mount-It! MI-7958A
Summary of Contents for Mount-It! MI-7958A
- Page 1 User Manual MI-7958A Please scan this QR code to visit the product page CORNER STANDING DESK CONVERTER...
-
Page 2: Package Contents
Thank you for choosing Mount-It PACKAGE CONTENTS Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact Mount-It! for assistance. CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury. •... - Page 3 Step 1 Step 3 Remove the Desktop from the Box Raise the Desktop Remove the Desk Converter (#A) from the packaging. If you have not already done so, squeeze the lever on the side of the Desk Converter and raise it to its highest position.
- Page 4 Step 5 Step 7 Attach the Keyboard Tray Keyboard Tray Cable Management 1.Attach the Keyboard Tray by sliding it beneath the bolts shown in magnification bubble 1. (Optional Step) Route the cables according to your device placement to determine the best location for the Ensure the bolts reach the end of the channels on the bracket, by lifting the tray up unto the Cable Management Clip.
- Page 5 Warnings Keep all monitors, laptops and other Raise the work surface slowly. Raising equipment fully on the work surface at all the work surface too quickly may cause times. Allowing any part of these to hang monitors, laptops and other equipment to off the edge may result in property fall resulting in property damage and/or damage and/or personal injury.
Need help?
Do you have a question about the MI-7958A and is the answer not in the manual?
Questions and answers