Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Protocol AEROFLUX
Summary of Contents for Protocol AEROFLUX
- Page 1 FOLDING DRONE WITH LIVE STREAMING CAMERA I N ST RU CT I ON M AN UAL...
- Page 2 Upper Body Lower Body...
- Page 3 INCLUDED FOLDING DRONE WITH LIVE STREAMING CAMERA...
- Page 4 Indoor: Large spaces away from barriers, crowds or pets. Outdoor: Sunny, windless and breezy weather. Do not fly in extreme environment,such as extreme heat or cold, strong wind or heavy rain.
- Page 5 OPEN THE ARMS （ ） ASSEMBLING BLADE GUARDS Align the blade guard with the arm (Figure 1) and press until it is securely in place (figure 2). Align the blades with the motor shaft and install them, the arm letter must be consistent with the blade letter. Tighten the screw clockwise.
- Page 6 LED light is on when charging and red light turns off when fully charged. Charging time is approx. 60 minutes.
- Page 8 - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. (1) Product name: AEROFLUX FOLDING DRONE WITH LIVE STREAMING CAMERA Model NO: SMPTC-90008...
- Page 9 Left Stick (Throttle Up/Down Headless Mode Left/Right Turn) Light On/Off Right Stick (Forward/Backward One-key Take-off Left/Right Bank) One-key Landing Photo Left Trim Video Right Trim Forward Trim Speed Backward Trim Flips Phone Holder-Pull up Power On/Off to install phone...
- Page 10 INSTALLING REMOTE BATTERIES batteries...
- Page 11 TURNING ON AND SYNCING THE DRONE&REMOTE 1. Turn on the drone and place it on a level surface. Then turn on the remote. The indicator light of the remote and drone's LED will flash. 2.Push the throttle up and then down. The drone will beep twice and the lights will go steady.
- Page 12 Idle Mode: Push the throttle up and release. The drone's blades will spin but the drone will not take off. The blades will stop spinning after 5-6 seconds of inactivity. Take-off Press the“One-key Take-off ”button, the drone blades rotate and automatically fly to a height of 1.5 meters Use the left joystick to control the flight altitude and turn left/right, and the right joystick to control the forward, backward, left and right side flight directions.
- Page 13 When the drone reaches more than 3 meters high, press the FIip button and move the right joystick to a desired direction. The drone will rotate in that direction. Flip Forward Flip Backward Users have the option to exit the default orientation (nose is the front of the drone).
- Page 14 TRIM FUNCTION When the aircraft drifts in different directions, you can use the trim to correct it. When the aircraft leaves the ground and the aircraft deviates to the back/forward, press the Forward/ Backward trim key to trim. When the aircraft leaves the ground and the aircraft deviates to the left/right, press the Right/Left trim key to adjust.
- Page 15 Forward/ Backward Trim Left/Right Bank Trim When the drone is within 30cm from the ground, it will be affected by the blade vortex and become unstable. This is “ground effect”. The lower the drone is, the greater the effect will be. will be affected by the strong winds.
- Page 16 Search “Protocol AeroFlux” and download the App to your smartphone. 2. Turn on the drone and the remote. 3. Once it is turned on, AeroFlux will transmit a Wi-Fi signal. Make sure your smartphone is connected to that signal. 4. Open the App and press “START”.
Need help?
Do you have a question about the AEROFLUX and is the answer not in the manual?
Questions and answers