JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual page 80

MENU SCREENS
Description of the Menu screens (continued)
TC/UB/CLOCK Menu screens
The TC/UB/CLOCK Menu consists of the following two screens. (1/2 and 2/2)
TC/UB/CLOCK [1/2] Menu screen
Item
TCG SELECT
EREGEN (01)
(0500)
NDF/DF [60]
EDROP (01)
(0501)
EOFF (00)
DF BIT [50]
(0502)
EOFF (00)
TC DUPLI.
(0503)
EOFF (00)
TC OFFSET
(0504)
NEXT BACK
PAGE BACK
E-76
Setting
PRESET (00) For selecting the time code generator mode.
PRESET
REGEN
NON DROP (00) For selecting the framing mode of the time code generator.
(Only for U model)
* Select here in the PRESET mode.
NON DROP : NON-DROP mode
DROP
For selecting whether to record drop-frame bits. (Only for E
ON (01) model)
(In DV format mode only)
OFF : No recording
ON
For selecting the type of time code recorded when an IEEE1394
AUTO (01) HDV/DV signal is input.
NON DROP (02) OFF
AUTO
NON DROP (In DV Format only):
For setting up the timing when time code data from the REMOTE
+1F (01) terminal of BR-HD50 to the editing remote controller are output.
+2F (02) OFF : Normal setting
–2F (03) +1F
–1F (04) +2F
–2F
–1F
For displaying the TC/UB/CLOCK [2/2] Menu screen.
For returning to the TOP Menu screen.
Description
: PRESET mode
: REGENERATION mode
: DROP-FRAME mode
: Recording
: Time code recording is controlled by "TCG
SELECT" menu setting.
: The time code inputted to the IEEE1394 terminal is
automatically duplicated. The framing mode of the
recorded time code will be the same as the framing
mode of the inputted time code.
Records the time code input to the IEEE1394 ter-
minal. The framing mode of the recorded time code
is fixed to non-drop frame mode. (Only for U
model)
Use this setting for dubbing tapes recorded with
BR-DV600, GY-DV500 or GY-DV550 in the NON-
DROP FRAME mode. (Only for U model)
: Outputs time code data +1 frame.
: Outputs time code data +2 frames.
: Outputs time code data -2 frames.
: Outputs time code data –1 frame.