JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual page 75

Hd video cassette recorder
Hide thumbs Also See for BR-HD50U - Compact HDV/DV Format Video Recorder:
Table of Contents

Advertisement

REMOTE [2/2] Menu screen
Item
EFF/REW (00)
REM FF/REW
MODE
(0205)
EEE (00)
REM STOP SEL
(0206)
E0F (00)
PB START
DELAY
(0207)
SYNCHRONI-
EON (01)
ZATION
(0208)
ETYPE1 (00)
CONTROLLER
SEL
(0209)
EOFF (00)
FOOT SW
(020A)
PAGE BACK
Setting
For setting the action to be performed when the REMOTE termi-
SEARCH (01)
nal or IEEE1394 terminal received an FF/REW command:
FF/REW : Sets BR-HD50 to perform FF/REW when an FF/REW
SEARCH : Sets BR-HD50 to perform searching when an FF/
For setting the action to be performed when the REMOTE termi-
PB (01)
nal received a STANDBY-ON command:
EE: Sets BR-HD50 to the EE mode. (It goes into the STOP mode.)
PB : Sets BR-HD50 to the PLAY mode. (It goes into the STILL mode.)
For adjusting the edit timing. With the remote controller in use, if
|
the start points of edit are not concurrent, adjust the playback
9F (09)
startup timing:
10F (0A)
0F
|
1F to 15F : Delays the timing by the number of frames set by the
15F (0F)
OFF (00)
For enabling/disabling the bump function when BR-HD50 is con-
nected to an editing remote controller:
OFF: No synchronization.
ON : Performs
For setting the type of controller to be connected when remote
TYPE2 (01)
control is enabled with the RS-422A interface:
TYPE3 (02)
TYPE1 : RM-G820
TYPE4 (03)
TYPE2 : RM-G860 (set the preroll time to at least 10 seconds)
TYPE5 (04)
TYPE3 : AG-A850
TYPE6 (05)
TYPE4 : RM-450, PVE-500
TYPE7 (06)
TYPE5 : FXE-100, FXE-120
TYPE6 : (Not in use)
TYPE7 : Avid Xpress DV, Canopus
For setting when an external switch (e.g., a footswitch) is con-
L EDGE (01)
nected to the SERIAL REMOTE terminal. Before operating an
H EDGE (02)
external switch (footswitch) with L EDGE or H EDGE, turn BR-
L LEVEL (03)
HD50 to the RECORDING PAUSE or RECORDING mode:
OFF
L EDGE : Recording and recording pause is switched at the
H EDGE : Recording and recording pause is switched at the
L LEVEL : Record at the LOW edge and pause recording at the
Return to the REMOTE [1/2] Menu screen.
command is received. Normal setting.
REW command is received. Use this setting if the
search (cue up) function does not work properly.
: No correction.
user. When BR-HD50 is connected to an editing
remote controller with no bump function, use this set-
ting to adjust the editing precision.
synchronization.
enhanced. Please set the pre-roll time to at least 7 seconds.
DV Rex-RT Professional
: For when the external switch is not used.
LOW edge of the external switch signal.
HIGH edge of the external switch signal.
HIGH edge of the external switch signal.
Description
The
editing
precision
is
E-71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Br-hd50

Table of Contents