Operation Method (Main Unit/Remote Controller) And Operation Lock Mode - JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual

PREPARATION

Operation method (main unit/remote controller) and OPERATION LOCK mode

Selecting the operating method (main unit/remote controller)
Whether to operate BR-HD50 with its buttons or the remote con-
troller can be selected with the REMOTE/LOCAL switch.
Setting the REMOTE/LOCAL switch
• To operate with the buttons of BR-HD50, set it to "LOCAL".
• To operate BR-HD50 with RS-422A editing remote controller
that is connected to the REMOTE terminal, set it to
"REMOTE".
Memo
With the REMOTE/LOCAL switch set to REMOTE, RS-422A can
be enabled using REMOTE SEL 9P in the REMOTE [1/2] Menu
screen.
• The setting position of the REMOTE switch for operating BR-
HD50 with the SERIAL REMOTE terminal can be selected
using REMOTE SEL SER in the REMOTE [1/2] Menu
screen.
• The setting position of the REMOTE switch for operating BR-
HD50 with the IEEE1394 terminal can be selected at REM
SEL HDV/DV in the REMOTE [1/2] Menu screen.
[XPage 70 "REMOTE [1/2] Menu screen"]
OPERATION LOCK mode
BR-HD50 comes with an operation lock function to prevent unauthorized or incorrect operation.
In the OPERATION LOCK mode, the operation buttons and slide switches of BR-HD50 are disabled.
However, the OPERATE ON and MENU operations are effective.
The PHONES volume is always effective.
Turning on the OPERATION LOCK mode
Set OPERATION LOCK in the SYSTEM [2/2] Menu screen to
ON.
• If the operation button of BR-HD50 is pressed while BR-
HD50 is in the OPERATION LOCK mode, "OPERATION
LOCK" is displayed on the monitor for about 3 seconds.
Turning off the OPERATION LOCK mode
Set OPERATION LOCK in the SYSTEM [2/2] Menu screen to
OFF.
E-36
REMOTE/LOCAL switch
REMOTE [1/2] Menu screen
– – – R E MO T E [ 1 / 2 ] – – –
R E MO T E S E L 9 P O N
R E MO T E S E L S E R O N
R E M S E L H D V / D V O N
L O C A L F U N C T I O N
S T P + E J T
P R E R O L L 7 S E C
N E X T P A G E
P A G E B A C K
Memo
If the REMOTE/LOCAL switch
is set to REMOTE, the buttons
that can be operated by the
main unit can be selected with
LOCAL FUNCTION.
SYSTEM [2/2] Menu screen
– – – S Y S T E M [ 2 / 2 ] – – –
D C I N M O D E
I N D E X W R I T E
O P E R A T I O N L O C K
6 0 / 5 0 S E L
F A C T O R Y S E T T I N G
D R U M H O U R M E T E R
P A G E B A C K
– – –
O P E O F F
I N D E X
O N
6 0
C A N C E L
0 0 0 0 0 0