Multi Cue-Up - JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual

Hd video cassette recorder
Hide thumbs Also See for BR-HD50U - Compact HDV/DV Format Video Recorder:
Table of Contents

Advertisement

PLAYBACK

Multi cue-up

Using the time codes recorded on the tape, up to 5 points on the tape can be registered as cue-up
points at the Multi Cue-up screen. The registered tape positions (cue-up points) can be searched.
SET button
Registering cue-up points
1.
Set the COUNTER switch to TC.
2.
Load a tape with time codes recorded.
3.
Press the CUE UP button.
The MULTI CUE UP screen appears on the monitor.
4.
Perform playback or search. At the position to be regis-
tered, set it to the STILL or STOP mode.
5.
Press the R or P button to bring the cursor to the cue-
up point. Press the SET button.
Register the time code data of the current position as a cue-
up point.
• If no tape is loaded, "00" is registered.
• Cue-up points can be registered while the tape is being
played back.
6.
To register more cue-up points, repeat steps
5 cue-up points can be registered.
Clearing registered cue-up points
Press the R or P button to bring the cursor to the cue-up point
to be cleared. Press the RESET button.
After a cue-up point is cleared, "– –" is displayed.
E-56
R button
RESET button
P button
CUE UP button
COUNTER swicth
For details on time code setting
and recording:
(XPage 58)
Cursor
Cue-up point
4
5
and
. Up to
Memo
– – – M U L T I
C U E U P – – –
C U E I
0 0 : 0 1 : 3 5 : 1 1
C U E 2
0 3 : 4 2 : 5 9 : 2 1
C U E 3
– – : – – : – – : – –
C U E 4
1 1 : 2 1 : 4 8 : 0 7
C U E 5
– – : – – : – – : – –
E X I T
" S E T "
: E N T R Y C U E D A T A
" R E S E T "
: C L E A R C U E D A T A
" C U E U P " : E X E C U T E C U E U P
MULTI CUE UP screen
– – –

Advertisement

Table of Contents
loading

This manual is also suitable for:

Br-hd50

Table of Contents