Connecting With Serial Remote Terminals - JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual

CONNECTION

Connecting with SERIAL REMOTE terminals

The following describes examples of SERIAL REMOTE terminal connection.
To use the SERIAL REMOTE terminals, set REMOTE SEL SER of the REMOTE [1/2] Menu screen
to "ON" or "LOC+REM." (XPage 70)
Operate BR-HD50 with the wired remote controller
SERIAL
REMOTE
Start/stop recording with an external switch, e.g., a foot switch.
SERIAL
REMOTE
Foot
switch
E-30
Connect the wired remote controller to the
SERIAL REMOTE terminal.
Wired remote
controller
Connect an external switch, e.g., a foot switch,
to the SERIAL REMOTE terminal.
The format of the input signals can be selected
with FOOT SW in the REMOTE [2/2] Menu
screen. (XPage 71)