JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual page 26

ON-SCREEN DISPLAY
Status display (continued)
No.
2 Date/time
Memo
If the display position of the
counter is set to the lower left,
this item will be displayed on
the lower right.
3 Counter display
E-22
D V 2 K C H – 1 / 2 3
D R UM MO T O R F A I L U R E
0 6 / 1 0 / 0 5
1 1 : 2 0 : 0 0
2
Item
• It displays the date and time (HR:MM:SS).
• When the unit is in the Analog/HDV Signal RECORDING
• During playback, fast-forwarding or rewinding, the data
• During DV signal recording, the data from the IEEE1394
• The style for displaying the date and time can be selected
• Whether to display date/time and the type of display can
• When the data/time is not set or when a tape is played with
Displays the CTL counter, time code or user's bit. The dis-
played contents can be selected using the COUNTER switch.
• CTL counter: It will be displayed if the COUNTER switch
• Time code : It will be displayed if the COUNTER switch
S P 2 0
W A R N I N G 7 0 0 1
R E C I N H I B I T
S T A N D B Y - O F F
T C R 0 2 : 0 0 : 0 0 : 0 0
3
or STOP mode, it displays the data of the built-in clock.
recorded on the tape is displayed.
terminal is displayed. If the REC button is pressed in the
STOP mode, the input data from the IEEE1394 terminal
will be displayed.
with DATE STYLE and TIME STYLE in the DISPLAY Menu
screen.
When TIME STYLE is set to 12H, the display symbols of
the hours, minutes, and days change as follows for AM
and PM.
AM = dot (.) PM = colon (:)
be selected with TIME/DATE in the DISPLAY Menu
screen.
no date/time data recorded, "– –" will be displayed.
is set to CTL. The counter shows a 7-digit
number (hour, minute, second and frame)
with + or – and "CTL" at the beginning, e.g.,
CTL-9:30:20:10
is set to TC. The time code shows an 8-digit
number (hour, minute, second and frame).
At playback, the time codes recorded on the
tape are displayed.
The prefix indicates the time code mode.
5
m i n
4
Description