JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual page 73

SYSTEM [2/2] Menu
Item
EOPE OFF (00)
DC IN MODE
(0107)
INDEX WRITE
EON (01)
(0108)
EOFF (00)
OPERATION
LOCK
(0109)
60/50 SEL
(010A)
ECANCEL (00)
FACTORY SET-
TING
(010b)
EAUTO (00)
PB TAPE
FORMAT
(010c)
DRUM HOUR
METER
PAGE BACK
Setting
For selecting the action to perform when the power is supplied to
OPE ON (01) the DC IN terminal:
OPE OFF : Sets BR-HD50 to the OPERATE OFF mode.
OPE ON : Sets BR-HD50 to the OPERATE ON mode.
OFF (00) For enabling/disabling index signal recording.
OFF : No index signal
ON : Select here to record index signals.
For enabling/disabling OPERATION LOCK.
ON (01) OFF : Turns off OPERATION LOCK and the operation buttons of
ON : Turns on OPERATION LOCK. The operation buttons and
60 (00) Sets HD video signal format to 60Hz or 50Hz.
50 (01) This menu item applies only to HDV format.
This must be set in the following situations.
• Set this menu item to match the input video signal format when
inputting HDV signals to the IEEE1394 terminal.
• Set this menu item to match the video format recorded on the
tape when playing a tape recorded with HDV signals.
60 : The HD signal format becomes 60Hz.
50 : The HD signal format becomes 50Hz.
[Settings upon shipping: U model: 60, E model: 50]
Memo
The unit restarts when this menu setting is changed.
The front panel 60 or 50 indicator is lit, according to this menu setting.
Recording and playback are unavailable when this menu setting dif-
fers from the HDV input signal or HDV recorded tape signal format.
During DV/analog signal input or when playing a tape recorded with DV/
analog signals, the field frequency format is fixed for the region, regard-
less of this menu setting. [U model: 60Hz (NTSC), E model: 50Hz (PAL)]
For enabling/disabling the factory setting for the Menu screens.
EXECUTE (01) CANCEL : Disable the factory setting
EXECUTE: Enable the factory setting
Memo
The unit restarts when this menu setting is executed.
Selects whether to automatically detect playback tape video for-
DV (01) mat, or to playback only a specific format.
HDV (02) AUTO
DVCAM (03)
DV
HDV
DVCAM : Plays back only video in DVCAM format.
Memo
When set to a specific format and a tape with a different format
is played back, there will be noise in the video.
If you play back a tape containing both DV and HDV formats,
the video signal is disturbed when the signal is switched.
For displaying the time of drum usage.
* The cursor cannot be brought to this item.
For returning to the SYSTEM [1/2] Menu screen.
Description
It records an index signal automatically at the position
where recording starts.
BR-HD50 can be used.
slide switches of BR-HD50 are disabled except the OPER-
ATE ON button and MENU operation. (XPage 36)
: Automatically detects and plays back all video formats.
: Plays back only video in DV format.
: Plays back only video in HDV format.
E-69