Recording Using The Serial Remote Terminal - JVC BR-DV3000U - Professional Editing Video Cassete recorder/player Instruction Manual

RECORDING
Recording can be turned ON/OFF with the serial remote controller or the footswitch connected
to the SERIAL REMOTE terminal on the rear panel.
OPERATE
Mini A.DUB
PROFESSIONAL
CH-1/3
MIC REMOTE SEL. INPUT SEL.
CH-2/4
SERIAL LINE
9PIN WIRELESS DV Y/C
REMOTE SEL. switch
REMOTE (1/2) menu
– – – R E MO T E [ 1 / 2 ] – – –
R E MO T E O N
L O C A L F U N C T I O N A L L K E Y S
P R E R O L L 5 S
R E M F F / R E W M O D E F F / R E W
R E M S T O P S E L E E
P B S T A R T D E L A Y O F
S Y N C H R O N I Z A T I O N O N
N E X T P A G E
P A G E B A C K
Memo
• The serial remote con-
troller can perform op-
erations other than re-
cording.
• The buttons on the unit
to be rendered operable
can be set via the LO-
CAL FUNCTION item of
the REMOTE(1/2) menu.
REMOTE (2/2) menu
– – – R E MO T E [ 2 / 2 ] – – –
C O N T R O L L E R S E L T Y P E 1
F OO T SW O F F
P A G E B A C K

Recording using the serial remote terminal

–
REC PLAY
DVCAM NTSC PAL REC INH.
REW
STOP
BR-DV3000
Connection
Connect the serial remote controller (available separately: RM-G30)
or the footswitch to the SERIAL REMOTE terminal on the rear panel.
Setting
Set the REMOTE SEL. switch on the front panel to "SE-
RIAL".
Set the REMOTE item of the REMOTE (1/2) menu to
"ON".
Set the FOOT SW item of the REMOTE (2/2) menu ac-
cording to the way in which the serial remote terminal
is used.
OFF
L EDGE
H EDGE
L LEVEL
Operation
Before using the footswitch, first engage the recording or recording
pause mode via the buttons on the main unit.
Memo
• The footswitch can only be used for switching the recording
operation ON/OFF.
• The footswitch functions irrespectively of the REMOTE SEL.
switch settings.
EJECT
DV IN/OUT
MENIU
AUDIO
PAUSE
CH 1/3 CH 2/4
SET
FF
: Set to "OFF" when the serial remote controller is used.
The footswitch cannot be used.
: Recording and recording pause operations are
switched at the LOW edge of the footswitch signal.
: Recording and recording pause operations are
switched at the HIGH edge of the footswitch signal.
: Record at the LOW edge and pause recording at the
HIGH edge of the footswitch signal.
SERIAL REMOTE terminal
VIDEO
Y/C
LINE
REMOTE
9PIN SERIAL
• Serial remote controller: RM-G30
• Footswitch
–
DC12V
NTSC/PAL
NTSC PAL
41