Table of Contents
Advertisement
3.
Remove the bottom cover from the computer (2).
To replace the bottom cover, reverse the removal procedures.
Battery
The battery removal procedure differs depending on whether you are removing and replacing the
existing battery or installing a new battery. To install a new battery, you must use a revive kit.
●
To remove and replace the existing battery, see
38.
●
To install a new battery, see
Removing and reinstalling the same battery
To remove the battery and reinstall it, use this procedure and illustration.
WARNING!
not puncture, twist, or crack the battery.
●
Do
not cause an external puncture or rupture to the battery, which can cause a short inside the
●
Do
battery that can result in battery thermal runaway.
●
Do
not handle or touch the battery enclosure with sharp objects such as tweezers or pliers, which
might puncture the battery.
●
not compress or squeeze the battery case with tools or heavy objects stacked on top of the
Do
case. These actions can apply undue force on the battery.
not touch the connectors with any metallic surface or object, such as metal tools, screws, or
●
Do
coins, which can cause shorting across the connectors.
For additional battery information, see the
this guide, select the Search icon in the taskbar, type HP Documentation in the search box, and then
select HP Documentation.
38
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Installing a new battery on page
To avoid personal injury and damage to the product:
Removing and reinstalling the same battery on page
39.
Regulatory, Safety, and Environmental Notices . To access
Advertisement
Table of Contents
Need help?
Do you have a question about the OMEN 16-am0 Series and is the answer not in the manual?