1. Manuals
  2. Brands
  3. Pulsar Manuals
  4. Power Supply
  5. HADOC 4024C
  6. Installation manual

Pulsar HADOC 4024C Installation Manual

Buffer, switch mode power supply unit with technical outputs
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HADOC 4024C
v.1.0
HADOC 27,6V/4A/2x17Ah/OC
Buffer, switch mode power supply unit
with technical outputs.
EN
Edition: 3 from 10.10.2014
Supercedes edition: 2 from 05.06.2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HADOC 4024C and is the answer not in the manual?

Questions and answers

Related Manuals for Pulsar HADOC 4024C

Summary of Contents for Pulsar HADOC 4024C

  • Page 1 HADOC 4024C v.1.0 HADOC 27,6V/4A/2x17Ah/OC Buffer, switch mode power supply unit with technical outputs. Edition: 3 from 10.10.2014 Supercedes edition: 2 from 05.06.2014...

  • Page 2: Table Of Contents

    Maximum battery charge current: 0,5A. Total device current + battery: 4,5A max OPTIONAL POWER SUPPLY CONFIGURATIONS: (visualisation available at: www.pulsar.pl) 1. Buffer power supply unit HADOC 27,6V/8x0,5A/2x17Ah. - HADOC4024C + LB8 8x0,5A (AWZ578 or AWZ580) + 2x17Ah 2. Buffer power supply unit HADOC 27,6V/4x1A/2x17Ah.

  • Page 3: Block Diagram

    GREEN POWER plus www.pulsar.pl HADOC4024C - HADOC4024C + 2xDCDC20 (2x5V÷18V/2A÷1,3A) + 2xLB4 8x0,5A (AWZ574 or AWZ576) + 2x17Ah 1.2 Block diagram (fig.1) Fig.1. The block diagram of the PSU. 1.3 Description of the module’s components and connectors (Tab.1, Fig.2). Table 1. Elements of the module’s (see fig. 2).

  • Page 4: Specifications

    GREEN POWER plus www.pulsar.pl HADOC4024C Element no. Description [Fig. 3] PSU module TAMPER, contact, sabotage protection (NC) Tab.2. Output terminals of the PSU. Fig.3. The view of the PSU. 1.4 Specifications: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6)
  • Page 5 GREEN POWER plus www.pulsar.pl HADOC4024C LED indication: - red, normal status – on, failure: off - AC diode indicating AC power status - green, normal status – on, failure: off - AUX diode indicating DC power status at the PSU output - green, normal status –...

  • Page 6: Installation

    GREEN POWER plus www.pulsar.pl HADOC4024C 2. Installation. 2.1 Requirements. The buffer PSU shall be mounted by a qualified installer with appropriate permissions and qualifications for 230V/AC installations and low-voltage installations (required and necessary for a given country). The device shall be mounted in confined spaces, according to the environment class II, with normal air humidity (RH=90% max.
  • Page 7 GREEN POWER plus www.pulsar.pl HADOC4024C Moreover, the PSU is equipped with 3LEDs on the PCB board: - red LED (Fig.2, element 1) normal status (AC power): permanently illuminated. AC power absence is indicated by the AC diode going out. Caution! LED indicates power absence if the outage lasts >10s.

  • Page 8: General Warranty Conditions

    GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a four-year warranty for the equipment, counted from the device’ production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects,...

Table of Contents