Advertisement
Advertisement
Table of Contents
Related Manuals for CA.MI NEW ASKIR 230/12V BR
Summary of Contents for CA.MI NEW ASKIR 230/12V BR
-
Page 2: General Warning
The medical device requires special precautions regarding electromagnetic compatibility and must be installed and used in accordance with the information provided with the accompanying documents: the NEW ASKIR 230/12V BR device must be installed and used away from mobile and portable RF communication devices (mobile phones, transceivers, etc.) that may interference with the said device. -
Page 3: Technical Characteristics
MDD 93/42/EEC (and subsequent changes) and its normatives. CONTRAINDICATIONS Before using the NEW ASKIR 230/12V BR, consult the instructions for use: failure to read all the instructions in this manual Don’t use the device thoracic drainage. can be harmful for the patient. - Page 4 Please note that the maximum suction value can vary according to reduced atmospheric pressure if the device is used at high altitude. The operator must take use at high altitude into account. In such conditions the vacuum produced by the internal pump can drop considerably due to the reduction of atmospheric pressure.
-
Page 5: Cleaning Device
CLEANING DEVICE Use a soft dry cloth with not – abrasive and not – solvent detergents. To clean the device external parts always use a cotton cloth dampened with detergent. Don’t use abrasive or solvent detergents. PARTICULAR CARE SHOULD BE TAKEN TO ENSURE THAT THE INTERNAL PARTS OF THE EQUIPMENT DO NOT GET IN TOUCH WITH LIQUIDS. - Page 6 DO NOT WASH, STERILIZE OR PUT IN AUTOCLAVE THE ANTIBACTERIAL FILTER PERIODICAL MAINTENANCE CHECKS The NEW ASKIR 230/12V BR suction equipment does not need maintenance or lubrication. since it is easy to understand the said device, it doesn’t appear to be necessary. Unpack the instrument and always check integrity It is, however to inspect the unit before each use.
- Page 7 damaged the upright position Pump motor damaged Contact the technical service 10. Noisy Technical internal problem Contcat the technical service Faults 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 – None of the remedies has Contact the seller or CA-MI After-sales Assistance 9 - 10 achieved the desired results...
- Page 8 To suspend and / o r terminate the treatment, press the switch againg and pull the plug out from the power socket. Unscrew the jar's lid and fill the jar 1/3 full or ordinary water (this for an easy cleaning operations and an rapid reaching of the functionally vacuum) then rescrew the lid on the jar correctly.
-
Page 9: Risk Of Electromagnetic Interference And Possible Remedies
Guidance and manufacturer’s declaration – electromagnetic Emissions The customers or the user of the surgical aspirator NEW ASKIR 230/12V BR should assure that it’s used in such an The surgical aspirator NEW ASKIR 230/12V BR is intended for use in the electromagnetic environment specified below. - Page 10 The customers or the user of the surgical aspirator NEW ASKIR 230/12V BR should assure that it’s used in such an The surgical aspirator NEW ASKIR 230/12V BR is intended for use in the electromagnetic environment specified below. environment. Immunity Test...
-
Page 11: Warranty Conditions
The NEW ASKIR 230/12V BR surgical aspirator is intended to operate in an electro-magnetic environment where RF irradiated interferences are under control. The client or operator of the NEW ASKIR 230/12V BR device can help prevent electro-magnetic interference by keeping a minimum distance between the portable and mobile RF communication devices (transmitters) and the NEW ASKIR 230/12V BR device, as recommended below, in relation to the radio-communication maximum output power.
Need help?
Do you have a question about the NEW ASKIR 230/12V BR and is the answer not in the manual?
Questions and answers
When my askir 230/12v br shows a red steady light when power supply is connected with and without the battery being connected to the internal system