Table of Contents
Advertisement
Quick Links
INSTALLATION /OWNER'S MANUAL
SYM-34-XT (SM-T190034-1)
SYM-50-XT (SM-T190050-1)
SYM-74-XT (SM-T190074-1)
SYM-100-XT (SM-T1900100-1)
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
SYMMETRY-XT SERIES
1
SYM-42-XT (SM-T190042-1)
SYM-60-XT (SM-T190060-1)
SYM-88-XT (SM-T190088-1)
Version:202306
Advertisement
Table of Contents
Related Manuals for Amantii SYMMETRY-XT Series
Summary of Contents for Amantii SYMMETRY-XT Series
- Page 1 INSTALLATION /OWNER’S MANUAL SYMMETRY-XT SERIES SYM-34-XT (SM-T190034-1) SYM-42-XT (SM-T190042-1) SYM-50-XT (SM-T190050-1) SYM-60-XT (SM-T190060-1) SYM-74-XT (SM-T190074-1) SYM-88-XT (SM-T190088-1) SYM-100-XT (SM-T1900100-1) INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE. CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE. Version:202306...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Please read and carefully follow all of the instruction found in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Amantii product. IMPORTANT INSTRUCTIONS ............................FCC CAUTIONS .................................. -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using this fireplace 2) The fireplace is hot when in use. -
Page 4: Fcc Cautions
FCC CAUTIONS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 5: Unpacking And Testing The Appliance
UNPACKING AND TESTING APPLIANCE UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging Prior to installing the appliance, test to make sure the appliance operates properly by plugging Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a 120 Volt grounded outlet. -
Page 6: Sym-34-Xt (Sm-T190034-1)
SYM-34-XT (SM-T190034-1) Description This appliance has been tested in accordance Built-in Appliance Voltage 120V AC 60Hz with the UL Standard 2021 for fixed and location dedicated electric room appliances in the United Watts 1200W Max States and Canada. If you need assistance NO HEATER 15.7W Max during installation, please contact your local... -
Page 7: Sym-42-Xt (Sm-T190042-1)
SYM-42-XT (SM-T190042-1) Description This appliance has been tested in accordance Built-in Appliance Voltage 120V AC 60Hz with the UL Standard 2021 for fixed and location dedicated electric room appliances in the United Watts 1200W Max States and Canada. If you need assistance NO HEATER 20.5W Max during installation, please contact your local... -
Page 8: Sym-50-Xt (Sm-T190050-1)
SYM-50-XT (SM-T190050-1) Description This appliance has been tested in accordance Built-in Appliance Voltage 120V AC 60Hz with the UL Standard 2021 for fixed and location dedicated electric room appliances in the United Watts 1200W Max States and Canada. If you need assistance NO HEATER 24.5W Max during installation, please contact your local... -
Page 9: Sym-60-Xt (Sm-T190060-1)
SYM-60-XT (SM-T190060-1) Description This appliance has been tested in accordance Built-in Appliance Voltage 120V AC 60Hz with the UL Standard 2021 for fixed and location dedicated electric room appliances in the United Watts 1200W Max States and Canada. If you need assistance NO HEATER 25.7W Max during installation, please contact your local... -
Page 10: Sym-74-Xt (Sm-T190074-1)
SYM-74-XT (SM-T190074-1) Description This appliance has been tested in accordance Built-in Appliance Voltage 120V AC 60Hz with the UL Standard 2021 for fixed and location dedicated electric room appliances in the United Watts 1200W Max States and Canada. If you need assistance NO HEATER 28W Max during installation, please contact your local... -
Page 11: Sym-88-Xt (Sm-T190088-1)
SYM-88-XT (SM-T190088-1) Description Built-in Appliance Voltage 120V AC 60Hz This appliance has been tested in accordance with the UL Standard 2021 for fixed and location Watts 1200W Max dedicated electric room appliances in the United NO HEATER 30W Max States and Canada. If you need assistance MOTOR HEATER during installation, please contact your local Appliance Width... -
Page 12: Sym-100-Xt (Sm-T1900100-1)
SYM-100-XT (SM-T1900100-1) Description This appliance has been tested in accordance Built-in Appliance with the UL Standard 2021 for fixed and Voltage 120V AC 60Hz location dedicated electric room appliances in Watts 1200W Max the United States and Canada. If you need NO HEATER 31W Max assistance during installation, please contact... -
Page 13: For Bathroom Use
FOR BATHROOM USE If this unit is installed in a bathroom it must be protected by a GIF receptacle or circuit. If receptacle is used it must be readily accessible. To prevent electric shock, please be aware that this unit is an electrical appliance that is NOT watertight and must be installed as to prevent water from entering unit. -
Page 14: Outdoor Installation
OUTDOOR INSTALLATIONS This electric fireplace is suitable for installation in outdoor areas protected from direct water impingement. In addition to maintaining the listed mantel and combustibles clearances, a rain protection overhang factor of 1/2 shall be constructed to the front and to each side of the installed appliance. -
Page 15: Installation
INSTALLATION- BUILT-IN NOTE: Due to the many different materials used to build NOTE: Due to the many different materials used to build walls, it is highly recommended that walls, it is highly recommended that you consult your local builder before you install this appliance on a wall. you consult your local builder before you install this appliance on a wall. - Page 16 2. When the trim is removed, take off the front glass panel. 3. Unscrew the 2 screws located on each side and take off the inner side steel panels.
- Page 17 4. Put the trim back onto the appliance and fasten with screws.(NOTE: This step is to make Put the trim back onto the appliance and fasten with screws.(NOTE: This step is to make Put the trim back onto the appliance and fasten with screws.(NOTE: This step is to make sure that the fireplace fits the wall opening well and there is no gap between the trim and that the fireplace fits the wall opening well and there is no gap between the trim and that the fireplace fits the wall opening well and there is no gap between the trim and...
- Page 18 6. Remove the trim following STEP 1. Screw back the inner side steel panels. the trim following STEP 1. Screw back the inner side steel panels. the trim following STEP 1. Screw back the inner side steel panels. 7. Put back the front glass panel and screw back the trim after you finish the media Put back the front glass panel and screw back the trim after you finish the media Put back the front glass panel and screw back the trim after you finish the media decoration.
-
Page 19: Hardwire Installation
HARDWIRE INSTALLATION 1. 120V, SYM-34/42/50-XT only Turn off the appliance completely and let cool before servicing. Only a qualified Turn off the appliance completely and let cool before servicing. Only a qualified Turn off the appliance completely and let cool before servicing. Only a qualified service person should service and repair this electric appliance. - Page 20 2. 120V, SYM-60/74/88/100-XT only 2.1 WIRING DIAGRAM Wiring diagrams are provided here for reference purposes only. This information is also provided on schematics attached directly to the appliance on the top left corner. CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS APPLIANCE OPERATION.
- Page 21 3. 240V, SYM-60/74/88/100-XT only 3.1 WIRING DIAGRAM Wiring diagrams are provided here for reference purposes only. This information is also provided on schematics attached directly to the appliance on the top left corner. CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS APPLIANCE OPERATION.
-
Page 22: Media Options
MEDIA OPTIONS The only media that comes with this version is Clear glass. Consumers may purchase optional decorative media if they choose. See dealer for more details. Clear glass DECORATIVE MEDIA INSTALLATION Unscrew 4 screws and take off the trim. (NOTE: Keep hold of the front glass as it may fall down automatically when the trim is removed.) INSTALLING THE DECORATIVE MEDIA Add your choice of decorative media into the tray. -
Page 23: Operation
OPERATION The Fireplace operates by using either the touch panel located on the upper left hand corner or by remote control. Plug the fireplace into a 15 Amp wall socket. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION Press to turn on and off the fireplace. -
Page 24: Remote Control Operation
REMOTE CONTROL OPERATION For remote to function make sure the fireplace is plugged in and the remote has batteries. Important: When operating the remote make sure you point the remote to the center of the fireplace. Each time you press the button, the buzzer inside the unit will beep once. It takes some time for the receiver to respond to the transmitter. - Page 25 AUTO means fireplace can automatically adjust to the temperature you set. When in AUTO, you can set the desired temperature with keys. You can switch temperature between Celsius and Fahrenheit with keys.When it is on Auto mode,fireplace operate at 1 00W. Press this button to adjust the speed of the flame.
- Page 26 When the 7 day timer’s set, the icon will be displayed on the LCD screen of the remote control. Press again to cancel the 7 da y timer and the icon will disappears. NOTE: If the 7 day timing and the general timing are set at the same time, the system will respond to an earlier shutdown time.
-
Page 27: Wifi Operation
WIFI OPERATION INSTALL TuyaSmart life There are 2 ways to install TuyaSmart; 1. Search for “TuyaSmart life” in the APP store on your phone, download and install. 2. Scan the QR code below with your mobile phone. WIFI SETTING AND FIREPLACE OPERATION 1. - Page 28 FIG.4 3. Press (flame button) on the touch panel of the fireplace for more than 5 seconds when the fireplace in standby mode. There will be 2 beeps come out from the fireplace and the (flame button) will flash as well indicating that Wi-fi is in EZ mode. Then please confirm to go next.
- Page 29 6. Now you are in the interface like FIG.7. You can operate the fireplace via Wi-fi. FIG.7 NOTE: Turn off the flashing blue Wifi indicator light Touch the (power button) once, the blue light will stop flashing.
-
Page 30: Replacement Parts
REPLACEMENT PARTS There is a QR code where the arrow is marked in below image (The QR code is on the left top behind the front glass). Scan the code to get the replacement parts list for your reference. You will get a detailed parts list with images. *There is a QR code in page 2 of the manual, at the bottom of the table of contents. -
Page 31: Exploded View
EXPLODED VIEW... -
Page 32: Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out Inspect the LED’s and replace them if necessary Back black cloth is falling off Change a new flicker and back and roll the flicker black cloth Ember bed is not Ember LED’s are burnt out Inspect the ember bed LED’s and... -
Page 33: Service History
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service Service Special Concerns Name Technician Name Performed NOTES:... -
Page 34: Warranty
Products covered by this limited warranty have been tested and inspected prior to shipment and, subject to the provisions of this warranty, Amantii warrants such products to be free from defects in material and workmanship for a period of five (5) years from the date of the first purchase of such products. - Page 35 The provisions of the United Nations Convention on Contracts for the Sale of Goods shall not apply to this limited warranty or the sale of products covered by this limited warranty. GENERAL Amantii reserves the right to make changes at any time without notice, in design, material, specifi cations, prices and the right to discontinue styles and products. GLASS...
- Page 36 Technical Support: 877.850.9458 - Ext 5 Customer Service: 877.850.9458 - Ext 1 Or Email us at: cdn-service@amantii.com...
Need help?
Do you have a question about the SYMMETRY-XT Series and is the answer not in the manual?
Questions and answers