Craftsman 26302 - Professional 20 Volt Lithium-Ion Operator's Manual page 4

Some of these following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DES|G NAT|ON/EXPLANAT|ON
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
no
No Load Speed Rotational speed, at no load
] Class II Construction Double-insulated construction
.../rain Per Minute Revolutions, strokes, surface speed,
orbits, etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp
locations.
i_ To reduce the risk of injury, user must
Read The Operator's Manual read and understand operator's manual
before using this product.
O Always wear safety goggles or safety
Eye Protection glasses with side shields and a full face
shield when operating this product.
Alert Precautions that involve
Safety your safety.
Failure to keep your hands away from the
No Hands Symbol blade will result in serious personal injury.
Failure to keep your hands away from the No Hands Symbol blade will result in serious personal injury.
Failure to keep your hands away from the No Hands Symbol blade will result in serious personal injury.
Failure to keep your hands away from the No Hands Symbol blade will result in serious personal injury.
To reduce the risk of injury or damage, Hot Surface avoid contact with any hot surface.
4