5)
The SC5300 LX KDK includes:
Redundant (1+0) 730W PFC power supply with dual line cord support (full redundancy requires additional
730W module)
Four redundant hot swap fans with ducting
Support for six tool free non hot-swap hard drives. Upgradeable to hot swap SCSI or SAS (supports SAS or
SATA).
Adapter kit for floppy drive (to mount standard size floppy in an unused 5.25" bay)
Quick start guide
Cables (one each):
Front Panel Cable (34-pin baseboard header to front panel)
USB Cable (USB header to chassis front panel)
Pre-routed floppy and IDE cables
Notes:
No AC power cords are included
To enable full redundancy monitoring, alerting, and management capabilities for fans and power
supplies an Intel® Management Module (IMM) is required with the SC5300 LX chassis.
6)
The SC5300 Base Redundant Power (BRP) KDK includes:
Redundant (1+0) 730W PFC power supply with dual line cord support (full redundancy requires additional
730W module)
Two non-redundant cooling fans with ducting
Support for six tool free non hot-swap hard drives. Upgradeable to hot swap SCSI or SAS (supports SAS or
SATA).
Adapter kit for floppy drive (to mount standard size floppy in an unused 5.25" bay)
Quick start guide
Cables (one each):
Front Panel Cable (34-pin baseboard header to front panel)
USB Cable (USB header to chassis front panel)
Pre-routed floppy and IDE cables
Notes:
No AC power cords are included
7)
The SC5300 Base KDK includes:
Non-redundant 600W PFC power supply
Two non-redundant cooling fans with ducting
Support for six tool free non hot-swap hard drives. Upgradeable to hot swap SCSI or SAS (supports SAS or
SATA).
Adapter kit for floppy drive (to mount standard floppy in an unused 5.25" bay)
7