Toggle On/Off Switch; Soft Start Feature; Led Worklights; Live Tool Indicator Light - Craftsman 17540 - 9.5 Amp 1-3/4 HP Plunge Base Router Operator's Manual

TOGGLE "ON/OFF" SWITCH (FIg_ 9)
Your router motor is turned "ON _ end "OFF by the toggle switch located
on the lop cap of the motor housing
The taft side of the toggle switch hood (as you face it) is marked 'T' for "On" end
the right side (as you face i_) is marked "O" for "OFF.
TO TURN THE MOTOR "ON", Push the toggle switch to the left side marked "F, or"On"
TO TURN THE MOTOR "OFF" Push the toggle switch to the r_ght side marked "O", or "OfF
Always hold the route rand cutter bit away lmm
the workplacewhen turning the toggte switch
"On" Only conlact the workplecewith the
rouler and cutter bit afler the muter has reached
fail speed ONLY remove the routerand cutler
bit from the workpieceAFTER turningtherouter
meter "OFF', and the cutterblt comes to a
comptete stop
Operating in this manner witl increaseloggia
switch and meter Iite, and will increase
the qualityof your work
SOFT START FEATURE
..............
Rgog
t
Electronic feedback control minimizes torque twist, customaryIn larger muter motors,
by limiting the speed at which the motor starts This Increases the motor's life
LED WORKLIGHTS (Fig. 10)
Your router motor has 3 buitt-in worktlghtslocated
around thetoilet/nut to provide high visibilityof
workpiecewhen cutting.These lights are always
"On" when the teggte ew{leh is In the "On "poeftlon
"LIVE TOOL INDICATOR" LIGHT (Fig. 11)
Your router else has a
"LIVE TOOL INDICATOR_
green tIght. Ioceled on the reeler housing
top cap where the power cord enters the motor
housing, Thls green light is always on when
router motor is plugged into powersource
21