Chip Shield Deflector; Dust Collection With Dust Extraction Hood - Craftsman 17540 - 9.5 Amp 1-3/4 HP Plunge Base Router Operator's Manual

I I .........
CHIP SHIELD DEFLECTOR (Fig. 18)
L_ WARNING: ALWAYS wear eye protection.
The chip ehtald deflector Is not Intandad as a safety guard.
The chip shield deflectors heip keep dust and
chips away lroro the operator;, they w_t not stop
objects larger than woodchips thrown fmro the
bit The chip shield deflector on lhe plunge base
is held in postlton by a screw To remove the
shie}d Imm the plunge base, siroptyremove
the screw and take the shield off of the base
Ax WARN!NG: The chip ehtald deflector helps keep dust and chips sway from
the operator, It will not stop oh|cots ta_er then woodchlps thrown from =.hebiL
_0opeCAUTION: ALWAYS have the chip shield deflector In piece on the bass when
rating the router.
L_ WARNING: ALWAYSturn motor off end unplug router from power source I
before mstdng shy ed|ustm_nte or installing accessories. Failure to turn motor off I
and unplug router could resul! In accidental starling which can cause asdous I
personal Injury.
J
DUST COLLECTION WITH DUST EXTRACTION HOOD (Fig. 19)
There Is e dust extrasilon hood included
with this router.The hood Is sized to accept a
l_la-fmvec hose adopter,ootd separately.
To attach the hoed onto the plunge base,
position end secure it lo the base with Ihe
two screws (Included) as shown in Fig 19
\ /
Flue19 2 screws tr_l_l
Z_ WARNING: ALWAYStum motor off and unplug router from power source.
before making any adjustments or Installing accessories. Failure to turn motor off
end unplug router could result tn accidental starting which can cause serious
personal injury.
2S