Toggle On/Off Switch; Soft Start Feature; Led Worklights; Livetool Indicator Light - Craftsman 320.17543 Operator's Manual

TOGGLE "ON/OFF" SWITCH (Fig. 12)
Your router motor Is turned "ON" and '_OFF" by the toggle switch located
on the top cap of the motor housing
The tell side of the toggle switch hood (as you lace it) is marked "1"for "On" and
lhe right side {as you face it) is marked "O" for "Off"
TO TURN THE MOTOR "ON", Push the toggle switch Io the ie{l side marked "1".or "On"
TO TURN THE MOTOR "OFF' Push the toggle switch to Ihe right side marked "O_ or "Off"
A_ways hold the router and cutter bit away from
the workpiece when turning the loggle switch
"On" Only contact the workpiece wffh the
router and cutter btl ailer the router has reached
lull speed ONLY remove the router and cutter
bit Item the werkpiece AFTER turning the router
motor "OFF". and the cutter bit comes loa
complete stop
SOFT START FEATURE
Electronic feedback eontreI minimizes torque Iwist customary in larger router molors,
by timiting the speed at which the motor slarls This increases the molor's iife
LED WORKLIGHTS (Fig. 13)
Your rouler motor has 3 built-in worklights located
around the cottetlnuI to provide high visibillty of
workpiece when cuttlng.Ti_ese lights are always
"On" when the toggle switch ts in the "On" position
Fig "13 _,:
"LIVE TOOL INDICATOR" LIGHT (Fig. 14)
Your router also has a "LIVE TOOL INDICATOR"
green light, Iooaled on the meier housing
top cap where the power cord enters the motor
housing This green light is always on when
router motor is plugged into power source
23
17543