When servicing, use only identical
parts. Use of any other part
may create a hazard or cause product damage.
Always wear safety goggles or safety
glasses with side shields when using compressed air
to clean products. If the operation is dusty, also wear
a dust mask.
To avoid serious personal injury, always
remove the battery pack from the product when
cleaning or performing any maintenance.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
Do not at any time let brake fluids,
oils, etc. come in contact with plastic parts.
Chemicals can damage, weaken or destroy plastic
which may result in serious personal injury.
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts
should be replaced at a Sears Service Center.
See Figures 9 - 10.
Insert a flat blade screwdriver between the edge of the
rotation button and the screwdriver body.
Remove rotation button.
Remove the five screws securing motor housing cover
then remove cover.
Lift batteries from motor housing enough to expose
leads and battery terminals. Disconnect leads from
battery terminals. NOTE: Be careful not to break battery
leads when disconnecting them.
To preserve natural resources, please
recycle or dispose of batteries properly.
This product contains nickel-cadmium
batteries. Local, state or federal
laws may prohibit disposal of nickel-
cadmium batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
Upon removal, cover the battery pack's
terminals with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components.
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
The screwdriver is equipped with nickel-cadmium
rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. To remove and dispose batteries,
follow BATTERY REMOVAL instructions. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.