CRRFTSMRN ° Owner's Manual Single Speed / Reversible CORDLESS SCREWDRIVER Model No. 315.111810 Save this manual for future reference CAUTION: Read and anlLIBRARY:. follow all Safety Rules Operating Instructions before first use of this product. Sears, Roebuck and Co., I-LO_llan Estates, I_._S,_' 972000-446 9-97...
• Parts Ordering / Service ..........................FULL ONE YEAR WARRANTY ON CRAFTSMAN CORDLESS SCREWDRIVER If this CRAFTSNAN Cordless Screwdriver fails to give complete satisfactionwithin one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of charge.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations wlth them, deserve your careful attention and understanding, The safety wamlngs do _ not by themselves ellmlnate any danger. The Instructions or warnings they give are not substltutes for proper accident prevention measures.
WHEN SERVICING USE ONLY IDENTICAL DO NOT USE TOOL IF SWITCH DOI_S NOT CRAFTSMAN REPLACEMENT PARTS, TURN IT ON AND OFF. Have defective switches IMPORTANT SAFETY INSTRUCTIONS replaced by an authorized service center.
RULES FOR SAFE OPERATION (Continued) Anextension cord should not b eused unless Do not operate charger if it has received a absolutely necessary, Use ofimproper sharp blow, been dropped, or othen,#ise extension cord could r esult inarisk offire and damaged in any way; take it to a qualified electric shock.
KNOW YOUR SCREWDRIVER WARNING: If any parts are missing,do_01" operate tool until the missingparts are replaced. See Figure 1. Failure to do so could result in possibleserious Before attempting to use your screwdriver, familiadze personal injury. yourself with all operating features and safety requirements.
CHARGING YOUR SCREWDRIVER Your screwdriver has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it at least 3 hours prior to use. Note: Batteries will not reach ful! charge the first time they are charged. Allow several cycles (driving screws followed by recharging) for them to become fully charged.
SWITCH Your screwdriver is equipped with a Forward/litllmrse Switch which allows you to change the direction of See Figure 4, rotationof the bit. For ddvingor forward rotation,slide To turn your screwdriverON, depress switch triggerin the switch to the forward(F) position.To reversethe the direction of the arrow in figure 4.
COLLET When usingyour screwdriverfor various driving applications,it becomes necessary to increase or The collet onyour s crewdriver has been d esigned to decrease the power and torque in order to help accept 1/4 in,hox bits. S ee Figure 6, prevent the possibilityof damaging screwheads, threads, workpiece, etc.
Remove old bulb by lifting it from socket. WARNING: When servicing,use only identical Craftsman replacement parts. Use of any other For your convemence, a bulb storage area with an part may create a hazard or cause product extra bulb has been provided. It is located inside damage.
Fig. 10 metal objects and/or body parts as short circuit may result, Keep away from children. Failure to comply with these warnings coutd result in fire and/or serious injury, WHEN SERVICING, USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS Part Number Description 974277-003 Battery Pack .
Forthe repairor replacementpartsyouneed delivereddirectlyto yourhome Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) Forrepairservice Call24 hoursa day,7 daysa week 1-800-4-REPAIR (1-800-473-7247) Forthe locationof a Sears PartsandRepair Center inyourarea Call24 hours a day,7 days a week 1-800-488-1 imiii| The modelnumberof thistool will be foundon a serial plate attachedto the motorhousing.Whenrequesting serviceor...