Download Table of Contents Print this page

Craftsman 315.111372 Operator's Manual

3.6 volt cordless screwdriver single speed/reversible


Quick Links

Model No.
To reduce the risk of injury,
the user must read and understand the
operator's manual before using this
Help Line: t-800-932-3188
Sears, Roebuck
and Co., 3333 Beverly Rd., Hoffman
Estates, IL 60179 USA
Visit the Craftsman web page:
Save this manual for future reference


Table of Contents

Related Manuals for Craftsman 315.111372

Summary of Contents for Craftsman 315.111372

  • Page 1 Customer Help Line: t-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: Save this manual for future reference 983000-587 10-04...
  • Page 2: One Year Full Warranty

    If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of charge. If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
  • Page 3: Work Area

    • Do not overreach. Keep proper footing and balance WARNINGX READ AND UNDERSTAND at all times. Proper footing and balance enable better INSTRUCTIONS. Failure to follow all instructions control of the tool in unexpected situations. listed below, may result in electric shock, fire and/or •...
  • Page 4 SERVICE • When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance • Tool service must be performed only by qualified section of this manual. Use of unauthorized parts or repair personnel. Service or maintenance performed failure to follow Maintenance Instructions may create a by unqualified personnel may result in a risk of injury.
  • Page 5 could result in a risk of fire and electric shock. If WARNINGX READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions extension cord must be used, make sure: listed below, may result in electric shock, fire a. That pins on plug of extension cord are the and/or serious personal injury.
  • Page 6 Someof the followingsymbolsmaybe usedon this tool. Please studythemand learntheirmeaning. P roper interpretation o f thesesymbolswillallowyouto operate the tootbetterandsafer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Current Amperes Hertz Frequency (cycles per second) Watt Power Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current No Load Speed...
  • Page 7 Thefollowing signal w ordsandmeanings a reintended to explain the levels of riskassociated withthisproduct. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will DANGER: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could WARNING: result in death or serious injury.
  • Page 8: Product Specifications

    PRODUCT SPECIFICATIONS Collet ................................1/4 in. Hex shank Motor ..................................3.6 Volt DC Switch ............................Single Speed / Reversible Gear Train .................................. 1 Speed No Load Speed ................................ 180/min. Clutch .................................. 22 Positions Charger Input ............................120 V, 60 Hz, AC only Charge Rate ...............................
  • Page 9: Know Your Screwdriver

    VIEW OFSCREWDRIVER IN PISTOLPOSITION STICK/PISTOL ROTATION BUTTON COLLET LIGHT SWITCH SWITCH CHARGER STORAGE SCREWDRIVER_ BITS(INCLUDED)__ Fig. 2 KNOW YOUR SCREWDRIVER STICK/PISTOL COMBINATION SCREWDRIVER The screwdriver has been designed so that it can be operated See Figures 1 - 2. as a stick screwdriver or a pistol screwdriver. Before attempting to use this product, familiarize yourself with all operating features and safety rules.
  • Page 10 WARNING: If any parts are missing do not operate UNPACKING this tool until the missing parts are replaced. Failure This product has been shipped completely assembled. to do so could result in possible serious personal • Carefully remove the tool and any accessories from the injury.
  • Page 11 CHARGING STAND BITSTORAGE As previously mentioned, a charging stand is packed with the screwdriver. If you decide to use charging stand, it can PILOT SCREWS either be mounted to a wall or placed on a flat surface to HOLES charge. The charging stand also has four slots to store bits.
  • Page 12 TO CHARGE SCREWDRIVER USING ROTATION CHARGING STAND See Figure 6. HANDLE • Place screwdriver in charging stand making sure input jack and charger plug are properly connected. • Align slots on screwdriver with tabs on charging stand then push on screwdriver to snap into place. •...
  • Page 13: General Maintenance

    MAINTENANCE WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part Avoid using solvents when cleaning plastic parts. Most may create a hazard or cause product damage. plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
  • Page 14 BATTERIES BATTERY PACK REMOVAL PREPARATION FOR RECYCLING The screwdriver is equipped with 3 nickel-cadmium See Figure 11. rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. TO REMOVE: The batteries in this tool have been designed to provide •...
  • Page 15 Thefollowing recommended accessories arecurrently available a t Searsretail s tores: • No.2 Phillips / 8-10 Slotted, 2 Ea. • No. 3 Phillips / 6-8 Slotted, 2 Ea. • 5-Pc. Hex Shank Drill Bit Set • 6-Pc. Extra Length Magnite Power Bit Set •...
  • Page 16: Parts List

    CRAFTSMAN 3.6 VOLT CORDLESS SCREWDRIVER • MODEL NO. 315.111372 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding the 3.6 VOLT CORDLESS SCREWDRIVER or when ordering repair parts.

Table of Contents