Operator’s Manual 4 Volt Screwdriver Model No. 172.417700 CAUTION: Read, understand and follow • WARRANTY all Safety Rules and Operating Instructions • SAFETY in this manual before using this product. • OPERATION • MAINTENANCE Sears Brands Management Corporation, • PARTS LIST Hoffman Estates, IL 60179 U.S.A.
For 90 DAY commercial and rental use terms, earthed or grounded. see the Craftsman warranty web page. 3. Do not expose power tools to rain or wet conditions. Water entering a power This warranty gives you specific legal rights, and you may also have other tool will increase the risk of electric shock.
GENERAL POWER TOOL SAFETY WARNINGS cont. SCREWDRIVER SAFETY WARNINGS PERSONAL SAFETY cont. 1. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make 6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing exposed metal parts of the power tool “live”...
GENERAL SAFETY WARNINGS cont. DESCRIPTION Do not short-circuit a cell or battery. Do not store cells or batteries haphazardly in a box or KNOW YOUR ELECTRIC SCREWDRIVER drawer where they may short-circuit each other or be short-circuited by conductive materials. (Fig.
OPERATING INSTRUCTIONS cont. TECHNICAL DATA BEFORE OPERATING THIS TOOL 41770 4V screwdriver CHARGE THE BATTERY Charger voltage 120 V~ 60Hz The battery charger supplied is only for the Li-ion battery installed in the tool. Rated voltage Do not use another battery charger. The Li-ion battery is protected against deep Battery capacity 1.5 Ah Li-ion discharging.
This switch changes the chuck bit rotation direction. Push the bottom of the rocker switch for driving forward and push the top Model No. 172.417700 for removing screws/reverse. The model number will be found on the nameplate of the Screwdriver.
PARTS LIST NOTES...