Table of Contents
Advertisement
WARNING:
When servicing, use only identical
Craftsman replacement parts. Use of any other
part may create a hazard or cause product
damage.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken or
destroy plastic.
BATTERIES
Your screwdriver is equipped with 4 nickel-cadmium
rechargeable batteries. Length of service from each
charging will depend on the type of work you are
doing.
The batteries in this tool have been designed to
provide maximum trouble free life. However, like all
batteries, they will eventually wear out. To remove
batteries, see page 11, Battery Removal. Handling of
these batteries, especially when wearing rings and
jewelry, could result in a serious burn.
MAINTENANCE
Do not abuse power tools. Abusive practices can
damage tool as well as workpiece.
Only the parts shown on parts list, page 11, are
intended to be repaired or replaced by the customer.
All other parts should be replaced at a Sears Service
Center.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.
WARNING:
create accessories not recommended for use
with this tool. Any such alteration or modification
is misuse and could result in a hazardous
condition leading to possible serious personal
injury.
To obtain the longest possible battery life, we suggest
the following:
Store and charge your batteries in a cool area.
Temperatures above normal room temperature
will shorten battery life.
Never store batteries in a discharged condition.
Recharge them immediately after they are dis-
charged.
All batteries gradually lose their charge. The
higher the temperature, the quicker they lose their
charge. If you store your tool for long periods of
time without using it, recharge the batteries every
month or two. This practice will prolong battery
life.
10
Do not attempt to modify this tool or
Advertisement
Table of Contents
