Download Print this page

Craftsman 320.37810 Operator's Manual

Pivoting screwdriver


Operator's Manual
4-Volt Lithium-ion
Pivoting Screwdriver
Model No. 320.37810
WARNING: To reduce the risk of injury,
the user must read and understand the
Operator's Manual before using this product.
Charge battery before first use
Sears Brands Management Corporation, Hoffman Estates,
IL 60179 U.S.A.
• WArrAnty
• SAfEty
• OpErAtIOn



Summary of Contents for Craftsman 320.37810

  • Page 1 Operator’s Manual 4-Volt Lithium-ion Pivoting Screwdriver Model No. 320.37810 • WArrAnty • SAfEty ѥ WARNING: To reduce the risk of injury, • ASSEMBLy the user must read and understand the • OpErAtIOn Operator’s Manual before using this product. • MAIntEnAnCE Charge battery before first use • ESpAñOL...
  • Page 2: Table Of Contents

    Page 17 Part List Pages 18-20 CRAFTSMAN ONE YEAR LIMITED WARRANTY FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or workmanship. With proof of purchase, a defective product will be replaced free of charge.
  • Page 3 ѥ DANGER: People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. ѥ WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
  • Page 4: Safety Symbols

    Alternating Current SAFETY SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful Direct Current attention and understanding. The symbol warnings do not, by themselves, eliminate any danger.
  • Page 5 SAVE THESE INSTRUCTIONS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes...
  • Page 6: Safety Instructions

    SAFETY INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS ѥ WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire, and/ or serious personal injury. Save all warnings and instructions for future reference. The term “power tool”...
  • Page 7 PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Page 8 • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. • Maintain power tools.
  • Page 9 SERVICE • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. • Follow instructions in the Maintenance section of this manual. Use of parts not listed in this manual or failure to follow Maintenance instructions may create a risk of shock or injury.
  • Page 10: Description

    DESCRIPTION KNOW YOUR PIVOTING SCREWDRIVER (Fig. 1) Fig. 1 Lock-off slide Bit Collet Forward/Reverse Power Unit jack switch LED Worklight Power Unit Charging socket Charging Indicator PRODUCT SEPCIFICATIONS Motor 4 Volt DC No Load Speed 200 RPM Max Torque 26-1/2 in.lbs. Tool Weight 0.88 lbs Bit collet...
  • Page 11 FORWARD/REVERSE SWITCH Forward/Reverse Switch – controls the direction of the rotation. LED WORKLIGHT The LED worklight is located on the front of the screwdriver. This feature provides extra light for increased visibility. PIVOT HANDLE The pivot handle will lock in two different positions to allow user the most comfort and control possible.
  • Page 12: Assembly

    ASSEMBLY ѥ WARNING: If any parts are broken or missing, do not operate the tool until the broken or missing parts are replaced. Failure to do so could result in serious injury. ѥ WARNING: Do not attempt to modify this screwdriver or create accessories not recommended for use with this screwdriver.
  • Page 13: Operation

    OPERATION HOW TO CHARGE THE Fig. 2 SCREWDRIVER (Fig. 2) Power unit To protect your new rechargeable jack screwdriver from possible damage, the battery is in a low-charge condition when initially shipped. Insert the power unit jack into Charging the charging socket, making sure socket that it is properly connected.
  • Page 14 FORWARD/REVERSE Fig. 4 Forward Switch SWITCH (Fig. 4) Push the lock-off slide forward ( ) to unlock the tool (Fig. 4a). Depress the forward/reverse switch to turn on the tool. The switch can also determine the direction of rotation of the tool. To select forward rotation, Reverse Switch press the “...
  • Page 15 GRIPPING THE Fig. 5 SCREWDRIVER (Fig. 5) Determine the best grip for your job according to the working conditions (Fig. 5). As the handle is pivoted to the desired position, you will hear a “click” to indicate the handle has been locked.
  • Page 16: Maintenance

    MAINTENANCE GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloth to remove dirt, dust, oil, grease, etc. ѥ WARNING: Do not at any time allow brake fluids, gasoline, petroleum-based products, penetrating oils, etc.
  • Page 17: Troubleshooting

    BATTERY REMOVAL AND PREPARATION FOR RECYCLING To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion battery. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
  • Page 18: Part List

    PART LIST 4-VOLT PIVOTING SCREWDRIVER MODEL NO. 320.37810 The Model Number will be found on the Nameplate attached to the body of the screwdriver. Always mention the Model Number when ordering parts for this tool. To order parts, call 1-800-469-4663.
  • Page 19 PART LIST 4-VOLT PIVOTING SCREWDRIVER MODEL NO. 320.37810 The Model Number will be found on the Nameplate attached to the body of the screwdriver. Always mention the Model Number when ordering parts for this tool. To order parts, call 1-800-469-4663.
  • Page 20 Part No Part Name 3126514000 Lock Pin 3660539000 Compression Spring 3126512000 Switch Support 3126513000 Lock Button 3126510000 Right Housing 2823365000 Right Handle Assembly 5610008000 Tapping Screw 5610034000 Tapping Screw 0800116000 Charger 3810102000 Screw Bit Page 20 37810 Manual_Revised_13-0116...