Ballard Designs Amos MS144 Manual

PRODUCT NAME: Amos Console
ITEM NUMBER: MS144
ASSEMBLED DIMENSIONS : 34"H x 60"W x 13"D
ASSEMBLY: Set each Shelf (D) upon Legs (E), align holes then insert Allen Screw (A) with Lock
Washer (B). Fully tighten using Allen Wrench (C).
(B)
(A)
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 3-29-2022
Ltr.
A / B
C
D / E
F
(D)
(E)
ANCHORING HARDWARE INCLUDED
Serious or fatal crushing injuries can occur from a furniture tip-over
Prevent tipping accidents. Anchor your furniture.
REQUIRED TOOLS:
Phillips Screwdriver, Allen Wrench (included)
-Two person assembly suggested.
Qty. Hardware/Components Included
8 / 8
1
2 / 2
2
LEVELERS: Console is
equipped with Rotary Levelers
installed under each leg. If
necessary, adjustments may be
made by carefully lifting appli-
cable corner and turning Level-
ers clockwise/counterclockwise.
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alcohol based
cleaners or polishers. Promptly remove spills.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
WARNING
Tip-Over Hazard
Allen Screws / Lock Washers
Allen Wrench
Shelves / Legs
Wall Anchoring (Anti-tip) Kits
See page 2
MADE IN INDIA
Page 1 of 2