Ballard Designs Emma MS108 Manual

2 door console

Download this manual

PRODUCT NAME: Emma 2 Door Console

ITEM NUMBER: MS108

ASSEMBLED DIMENSIONS : 35 3/4"H x 39 1/2"W x 10 1/2"D

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

UPDATED: 8-12-2020

Prevent accidentally discarding small parts or

hardware. Retain all carton contents until assembly

and installation are complete.

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

MADE IN CHINA

Page 1 of 4

Need help?

Do you have a question about the Emma MS108 and is the answer not in the manual?

Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Emma 2 Door Console ITEM NUMBER: MS108 ASSEMBLED DIMENSIONS : 35 3/4”H x 39 1/2”W x 10 1/2”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete. PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE.
Page 2 Assemble in location for intended use. Shelf (D) Hardware Packet REQUIRED TOOLS: -Phillips Screwdriver Ltr. Qty. Hardware Included -Two person assembly suggested. Shelf Supports Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface. Wall Anchoring Anti-tip Kits WARNING...
Page 3 STEP 1: First, gently lay Shelf (D) into Console (C). Orient and tilt downward to clear Console doors. Allow Shelf to rest on bottom of Console. Next, from back, lift Shelf up onto its side and lean it against back of console. Finally, place four Shelf Supports (A) into pre-drilled holes at desired height then lift Shelf and place upon Supports.
Page 4 WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Customer Service: 800-367-2810 Online: www.ballarddesigns.com Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1.