Changing The Bands - Garmin FORERUNNER 970 Owner's Manual

Changing the Bands

You can replace the bands with new Forerunner bands or compatible QuickFit
1 Use the pin tool to push in the watch pin.
2 Remove the band from the watch.
3 Select an option:
• To install Forerunner bands, align one side of the new band with the holes on the device, push in the
exposed watch pin, and press the band into place.
NOTE: Make sure the band is secure. The watch pin should align with the holes on the device.
• To install QuickFit 22 bands, remove the watch pin from the Forerunner band, replace the watch pin on the
device, and press the new band into place.
NOTE: Make sure the band is secure. The latch should close over the watch pin.
4 Repeat the steps to change the other band.
Device Information
® 22 bands.
141