Table 74 Ip Application > Diffserv > Dscp Setting - ZyXEL Communications Dimension ES-2048 User Manual

The following table describes the labels in this screen.
Table 74 IP Application > DiffServ > DSCP Setting
LABEL DESCRIPTION
0 ... 63 This is the DSCP classification identification number.
To set the IEEE 802.1p priority mapping, select the priority level from the drop-down list
box.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
ES-2048 User's Guide
Chapter 24 Differentiated Services
207