Table 31 Advanced Application > Broadcast Storm Control - ZyXEL Communications Dimension ES-2048 User Manual

Chapter 13 Broadcast Storm Control
The following table describes the labels in this screen.
Table 31 Advanced Application > Broadcast Storm Control
LABEL
Active
Port
*
Broadcast (pkt/s) Select this option and specify how many broadcast packets the port receives per
Multicast (pkt/s)
DLF (pkt/s)
Apply
Cancel
118
DESCRIPTION
Select this check box to enable traffic storm control on the Switch. Clear this check
box to disable this feature.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
second.
Select this option and specify how many multicast packets the port receives per
second.
Select this option and specify how many destination lookup failure (DLF) packets
the port receives per second.
Click Apply to save your changes to the Switch's run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Click Cancel to reset the fields.
ES-2048 User's Guide