Resetting Stations; Registering A Handset; Adapter And Battery Information - Uniden D3098S User Manual

3. Let dry for at least 3 days. Check for liquid inside the phone before replacing
compartment covers and reconnecting cords.

Resetting Stations

If you have problems with the base, unplug the base to reset it. Plug it back in
after at least a minute.
If you have trouble with a cordless handset or if you want to replace one, reset
it:
1. Press and hold FlasH/exiT and POUND (#) at the same time until
displays (about 5 seconds).
2. If you still have the base the handset is registered to, select
select the handset you want to reset. If you don't have that base anymore,
select Base Unavailable.
3. To confirm, select Yes. The handset displays

Registering a Handset

If you see a "not registered" message on a handset, you must register it to a
base before using it.
1. On the base, open the menu and select
2. On the handset, press and hold POUND (#) until the handset display says
Handset Registering
3. Wait until the handset display says
then pick up the handset and press eND/CleaR.
#
If you don't hear a dial tone or the display says
the battery completely, then try again.
Adapter and
Battery Information
AC adapter
Part number
Input voltage
Output voltage
 Use only the supplied AC adapters.
 Use the proper adapter for the base
and any chargers.
 Do not place the unit in direct
sunlight or subject it to high
temperatures.
(about 2 seconds).
Base Charger
PS-0034 PS-0035
120V AC, 60 Hz
7.8V AC 8V AC
@ 450mA @ 300mA
Handset not
Register Handset.
Registration Complete
Registration
Battery pack (with normal use)
Part number
Capacity
Talk time
Standby time
Battery life
 Replace the battery when the talk
or standby time becomes noticeably
reduced. For replacements, call the
Parts Department (see the front
cover).
 If you hear a strange beep during a
call, check the display. When the
battery gets low, the handset shows
a low battery alert; recharge the
battery.
System Reset
Deregister HS, then
registered.
(about 30 seconds),
Failed, charge
BT-1025
500mAh, 2.4V DC
about 10 hours
about 7 days
about 1 year
27 - English