Table of Contents
Advertisement
Rechargeable Battery Warning
This equipment contains a
rechargeable Nickel-Metal-Hydride
(Ni-MH) battery.
Nickel is a chemical known to the
state of California to cause cancer.
Do not short-circuit the battery.
The batteries in this equipment may
explode if disposed of in a fire.
Do not charge the batteries in any
charger other than the one specified
in the owner's manual. Using
another charger may damage the
battery or cause it to explode.
As part of our commitment to
protecting our environment and
conserving natural resources,
Uniden voluntarily participates in
®
an RBRC
industry program to
collect and recycle used Ni-MH
batteries within the United States.
Please call 1-800-8-BATTERY for
information on Ni-MH battery
recycling in your area. (RBRC
registered trademark of the
Rechargeable Battery Recycling
Corporation.)
Rechargeable Batteries Must Be
Recycled or Disposed of Properly.
Uniden works to reduce lead
content in PVC coated cords in our
products and accessories.
Warning! The cords on this product
and/or accessories contain lead,
a chemical known to the state of
California to cause birth defects
or other reproductive harm. Wash
hands after handling.
Compliance Information
FCC Part 68 Information
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
28 - English
On the bottom of this equipment is a label that
contains, among other information, a product
identifier in the format US: AAAEQ##TXXXX.
If requested, this number must be provided to the
phone company.
An applicable Universal Service Order Codes
(USOC) certification for the jacks used in this
equipment is provided (i.e., RJ11C) in the
packaging with each piece of approved terminal
equipment. A plug and jack used to connect this
equipment to the premises wiring and telephone
network must comply with the applicable FCC
Part 68 rules and requirements adopted by the
ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed
to be connected to a compatible modular jack that
is also compliant. See installation instructions for
details.
The REN is used to determine the number of
devices that may be connected
to a phone line. Excessive RENs
on a phone line may result in
devices not ringing in response to
an incoming call. In most but not
all areas, the sum of RENs should
not exceed five (5.0). To be certain
of the number of devices that may
be connected to a line, as determined by the total
RENs, contact the telephone provider. The REN
for this product is part of the product identifier
®
is a
that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the telephone
network, the telephone company will notify you
in advance that temporary discontinuance of
service may be required. But if advance notice
isn't practical, the telephone company will notify
the customer as soon as possible. Also, you
will be advised of your right to file a complaint
with the FCC if you believe it is necessary. The
telephone company may make changes in its
facilities, equipment, operations or procedures
that could affect the operation of the equipment. If
this happens the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
Please follow instructions for repairing, if any
(e.g. battery replacement section); otherwise do
not substitute or repair any parts of the device
except as specified in this manual. Connection
to party line service is subject to state tariffs.
Contact the state public utility commission, public
service commission or corporation commission
Hide quick links:
Advertisement
Table of Contents
