Download
Share
Print this page
BK Precision PVS10005 User Manual
  1. Manuals
  2. Brands
  3. BK Precision Manuals
  4. Power Supply
  5. PVS10005
  6. User manual
BK Precision PVS10005 User Manual

BK Precision PVS10005 User Manual

High power programmable dc power supply
Hide thumbs Also See for PVS10005:

Advertisement

Quick Links

Download this manual
Model: PVS10005, PVS60085, PVS60085MR
High Power Programmable DC
Power Supply
USER MANUAL
www.valuetronics.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the PVS10005 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BK Precision PVS10005

Summary of Contents for BK Precision PVS10005

  • Page 1 Model: PVS10005, PVS60085, PVS60085MR High Power Programmable DC Power Supply USER MANUAL www.valuetronics.com...
  • Page 2 Safet Su The follo i g safet p e autio s appl to oth ope ati g a d ai te a e pe so el a d ust e follo ed du i g all phases of ope atio , se i e, a d epai of this i st u e t. Befo e appl i g po e to this i st u e t: ...
  • Page 3 Catego I CAT I : Measu e e t i st u e ts hose easu e e t i puts a e ot i te ded to e o e ted to the ai s suppl . The oltages i the e i o e t a e t pi all de i ed f o a li ited-e e g t a sfo e o a atte .
  • Page 4 e su e it is app op iate fo ou ou t of use. Grou d the I stru e t To i i ize sho k haza d, the i st u e t hassis a d a i et ust e e ted to a ele t i al safet g ou d.
  • Page 5  In the presence of noxious, corrosive, or flammable fumes, gases, vapors, chemicals, or finely-divided particulates.  In relative humidity conditions outside the instrument's specifications.  In environments where there is a danger of any liquid being spilled on the instrument or where any liquid can condense on the instrument.
  • Page 6 i st u e t f o se i e, la el it as ot to e ope ated, a d etu i st u e t to B&K P e isio fo epai . Notif B&K P e isio of the atu e of a o ta i atio of the i st u e t.
  • Page 7 afte aki g the easu e e ts testi g ith k o -ope ati g oltage sou es a d test fo oltages. Do ot atte pt se i e o adjust e t u less a othe pe so apa le of e de i g fi st aid a d esus itatio is p ese t.
  • Page 8 This i st u e t o tai s o e o o e ooli g fa s. Fo o ti ued safe ope atio of the i st u e t, the ai i let a d e haust ope i gs fo these fa s ust ot e lo ked o ust a u ulated dust o othe de is e allo ed to edu e ai flo .
  • Page 9 Co plia e State e ts Disposal of Old Ele t i al & Ele t o i E uip e t Appli a le i the Eu opea U io a d othe Eu opea ou t ies ith sepa ate olle tio s ste s This p odu t is su je t to Di e ti e / /EC of the Eu opea Pa lia e t a d the Cou il of...
  • Page 10 CE De la atio of Co fo This i st u e t eets the e ui e e ts of / /EC Lo Voltage Di e ti e a d /EC Ele t o ag eti Co pati ilit Di e ti e ith the follo i g sta da ds.
  • Page 11 Safet S Refe to the use a ual fo a i g i fo atio to a oid haza d o pe so al i ju a d p e e t da age to i st u e t. Ele t i “ho k haza d “uppl .
  • Page 12 CAUTION i di ates a haza dous situatio hi h, if ot a oided, ill esult i i o o ode ate i ju WARNING i di ates a haza dous situatio hi h, if ot a oided, ould esult i death o se ious i ju DANGER i di ates a haza dous situatio hi h, if ot a oided, ill esult i death o se ious i ju .

  • Page 13: Table Of Contents

    Table of Contents Safet Su a ..............i Co plia e “tate e ts ..............iii “afet “ ols ..................Ge e al I fo atio ............. P odu t O e ie ............... Pa kage Co te ts ............... P odu t Di e sio s ..............
  • Page 14 P eli i a Che k ..............War -up Ti e ................Output Che k .................. Che k Model a d Fir are Versio ..........F o t Pa el Ope atio ..........Me u Optio s ................Ho to A ess the Me u..............Co figu e Voltage/Cu e t Output ..........
  • Page 15 PV “i ulatio ................P og a Fu tio ..............O er ie ..................Co figure Progra Para eters ............Ti e Fu tio ................. “le Rate “etti g ..............Re ote Ope atio ............I te fa e Co figu atio ............Pa a ete Defi itio ..............
  • Page 16 E te al Voltage P og a i g Cali atio ......E te al Cu e t P og a i g Cali atio ......CC Cali atio of E te al Voltage ......... CC Cali atio of E te al Cu e t ......... T ou leshooti g Guide ..........

  • Page 17: Ge E Al I Fo Atio

    1.1 P odu t O e ie B&K Precision models PVS60085, PVS60085MR, and PVS10005 are high voltage programmable DC power supplies with single outputs that offer the maximum power output up to 5100 watts (0 - 600 V / 8.5 A or 0 - 1000 V / 5 A).

  • Page 18: Pa Kage Co Te Ts

    “a e the o igi al pa ki g a to fo possi le futu e eship e t. E e po e suppl is shipped ith the follo i g o te ts:  1 x PVS10005, PVS60085, or PVS60085MR Power Supply  1 x User Manual ...

  • Page 19: P Odu T Di E Sio S

    1.3 P odu t Di e sio s The PV“ , PV“ , a d PV“ MR po e suppl ’s di e sio s a e app o i atel : W H D . These U supplies a e desig ed to fit i a sta da d -i h a k ou t.

  • Page 20: F O T Pa El O E Ie

    1.4 F o t Pa el O e ie Figu e . – F o t Pa el O e ie Fro t Pa el Des riptio Po e O /Off s it h Va uu Fluo es e t Displa OVP, OCP, OPP i di ato s Ke pad lo k i di ato Fu tio ke s...

  • Page 21: Ke Pad O E Ie

    1.5 Ke pad O e ie Figu e . – Ke pad O e ie Ke pad Des riptio Shift ke E a les a ess to se o dar fu tio s La eled i Mete displa utto Toggles displa et ee set a d easured oltage a d urre t.
  • Page 22 De i al / Lo al utto I puts a de i al poi t for alues or sets the i stru e t a k to lo al ode Nu e i ke pad E ters u eri alues for arious para eters. Me u utto Allo s a ess to the po er suppl e u setti gs.

  • Page 23: Rea Pa El O E Ie

    1.6 Rea Pa el O e ie Figu e . – Rea Pa el O e ie Rear Pa el Des riptio Output a d e ote se se te i als USB i te fa e i te fa e A alog p og a i g i te fa e DB e to...

  • Page 24: Displa O E Ie

    1.7 Displa O e ie Figu e . – Displa O e ie Displa Des riptio Set/Measu ed oltage Setti gs displa Displa s para eter setti gs su h as OVP, P- a , Rise/Fall Measu ed po e output Set/Measu ed u e t I di ates output is disa led I di ates o sta t u e t CC ope atio...

  • Page 25: Getti G Sta Ted

    2 Getti g Sta ted Befo e o e ti g a d po e i g up the i st u e t, please e ie a d go th ough the i st u tio s i this hapte . 2.1 I put Po e a d Fuse Re ui e e ts I put Po er The suppl has a u i e sal AC i put that a epts li e oltage i put...
  • Page 26 The included AC power cord is safety certified for this instrument operating in rated range. To change a cable or add an extension cable, be sure that it can meet the required power ratings for this instrument. Any misuse with wrong or unsafe cables will void the warranty. SHOCK HA)ARD: The po e o d p o ides a hassis g ou d th ough a thi d o du to .
  • Page 27 Figu e . – AC Po e Co e tio Diag a Refe to the des iptio s elo to o e t the othe e d of the AC po e o d to the AC dist i utio pa el. Do NOT plug the AC power cord into the wall socket prior to connecting ALL three AC power wires to the rear panel and securely mount the safety metal housing over...

  • Page 28: Fuse Repla E E T

    Figu e . – AC Po e Co d Fuse Repla e e t This po e suppl does ot e ui e a fuse that is use epla ea le. The e is a i te al fuse, i hi h if lo , a i di ate a alfu tio i the u it.
  • Page 29 a i et. Ra k ou t a kets ust e asse led efo e ou ti g the u it i a a k. Refe to the follo i g figu e to asse le the a k ou t a kets.
  • Page 30 to the a ou t of u e t used fo ope atio : Imax(A) Ω/ ete Ta le – Wi e Gauge Rati g Before connecting wires to the output terminals, turn OFF the power supply to avoid damage to the instrument and the device under test (DUT).
  • Page 31 2.4 P eli i a Che k Co plete the follo i g steps to e if that the po e suppl is ead fo use. Verify AC input voltage Verify and check to make sure proper AC voltages are available to power the instrument.
  • Page 32 Output Che k Voltage Che k Follo the steps elo to he k oltage output ith o load o e ted. 1. Turn ON the power supply. The display will show the OFF annunciator above the voltage display. 2. Enable the output by pressing , and the LED next to the button will be lit.
  • Page 33 2. Short the (+) and (-) output terminals with test leads, shorting bar, or clip. (Refer to – Wire Gauge Rating to select appropriate test leads) 3. Using the numeric keypad or the current adjust knob, enter a small current value (i.e. 1.000 A). If entering with numeric keypad, press first, then enter the value and press The current display will now show the value you entered.
  • Page 34 2. Press the button three times until INFO is blinking. Press , and the display will show the following screen: 3. The model is shown above as PVS10005. 4. Press once again and the firmware version will displayed. 5. The firmware is shown above as 1.52.
  • Page 35 3 F o t Pa el Ope atio 3.1 Me u Optio s All setti gs a d pa a ete s a e o figu ed f o the uilt-i s ste of the po e suppl . To a ess the e u, p ess The e u s ste is di ided i to se tio s a d a e o ga ized as follo s: SYSTEM COMM...
  • Page 36 Ho to A ess the Me u Befo e usi g the i st u e t, it is i po ta t to e fa ilia ized ith its e u st u tu e a d lea ho to ie o ha ge setti gs a d pa a ete s.
  • Page 37 8. To exit the menu at any time, press twice. 3.2 Co figu e Voltage/Cu e t Output Voltage a d u e t a e set f o the f o t pa el. Re ote se se is also a aila le o the ea pa el fo oltage o pe satio at the output.
  • Page 38 alue if the test is eeded. Setti g Curre t Follo the steps elo to set the output u e t: 1. From the normal front panel display, users can use either the current adjust knob or the numeric keypad to enter the setting current.
  • Page 39 Re ote Se se Re ote se se a e used to o pe sate fo oltage d ops up to V PV“ /MR o V PV“ due to esista e f o test leads e ted to ou de i e u de test DUT , thus p o idi g o e a u ate output oltage.
  • Page 40 output is o e ted to the egati e e d - of the load. Whe this se si g ode is sele ted the i es o e ti g et ee DC outputs to the load ust e as sho t as possi le. The lo al se se is the default o figu atio ith sho ti g a s o e t et ee...
  • Page 41 2. Use a small flat blade screwdriver to loosen the wire connection connected between Vo+ and S+ and S- and Vo-. 3. Connect the S+ to the DUT’s positi e + terminal, and connect the S- to the DUT’s egati e -) terminal. 4.
  • Page 42 The follo i g ta le sho s the a ious essages that a ale t the use : System message Description IAC TOO HIGH! AC input current too high VBUS NO CHARGE! Internal PFC VBUS is not charged VAC TOO LOW! AC input voltage too low VAC TOO HIGH! AC input voltage too high...
  • Page 43 3.5 SYSTEM Me u All setup p o edu es a d setti gs e plai ed i this se tio a essed f o the SYSTEM e u. To a ess this e u, p ess Whe SYSTEM is li ki g, p ess Re ote Co u i atio Co figuratio To set up e ote i te fa e o...
  • Page 44 2. Use the rotary knob or the numeric keypad to enter the storage group. Select between 0 – 9. Press to save selection. 3. To exit the menu at any time, press twice. Sa e Setti gs 1. Set up output voltage and current settings that you want to save.
  • Page 45 Instrument settings can only be recalled when the instrument enters this mode. 2. Use the keypad to enter the memory location you want to recall. Enter between 0 – 9. The voltage and current settings of that memory location will be shown on the bottom of the display. 3.
  • Page 46 The table below lists some of the factory default settings. Ta le - Fa to Default Setti gs Item Parameter PVS60085/MR PVS10005 Voltage 10.0 V 10.0 V Output Current 1.0000 A 1.0000 A...
  • Page 47 CC to CV Voltage 6 V/ms 4 V/ms Slope Current 85 mA/ms 20 mA/ms Mode Parallel Role MASTER MASTER Enable NOT ACTIVE NOT ACTIVE Voltage FRONT FRONT Current FRONT FRONT External Control V/ kΩ V/ kΩ Program range Monitor range Shut off logic OFF/LOW OFF/LOW...
  • Page 48 GPIB Address RS-232C Baud, parity, data, stop 9600, N, 8, 1 9600, N, 8, 1 Baud, parity, data, stop 9600, N, 8, 1 9600, N, 8, 1 RS-485 Address Mode AUTO AUTO IP address 0.0.0.0 0.0.0.0 Mask address 0.0.0.0 0.0.0.0 Gateway address 0.0.0.0 0.0.0.0...
  • Page 49 3. Select one of the settings wanted during power up, and press to save changes. If USER has been selected, set user defined voltage, current and output state. 4. To exit the menu at any time, press twice. 3.6 CONFIG Me u All setup p o edu es a d setti gs e plai ed i this se tio a essed f o the CONFIG e u.
  • Page 50 Figu e . – Output Li it Setti gs G aph Note: At a ti e du i g ope atio , he ou a e u a le to set to a desi ed oltage o u e t, he k these li it setti gs to ake su e the set alue is ithi the li it’s a ge.
  • Page 51 2. Use the keys to select the limit setting value of VMAX, VMIN, IMAX, and IMIN. Press to confirm selection. 3. Use the numerical keys to set the limit value and press confirm the setting. 4. Press several times to exit the menu setting. Prote tio Setti gs Co figu e O e Voltage P ote tio The PV“...
  • Page 52 4. Use numerical keys directly or use keys with rotary adjustment followed by to confirm the OVP value. 5. Press several times to exit the menu setting. 6. If the OVP is on, the OVP LED indicator will be lit up. Whe OVP p ote tio is t ipped du i g ope atio , the output ill tu off a d the follo i g OVP status essage ill displa : To lea the t ip status, p ess...
  • Page 53 4. Use rotary to select the OCP ON or OFF followed by 5. Use numerical keys directly or use keys with rotary adjustment followed by to confirm the OCP value. 6. Press several times to exit the menu setting. 7. If the OCP is on, the OCP LED indicator will be lit up. Whe OCP p ote tio is t ipped du i g ope atio , the output ill tu off a d the follo i g OCP status essage ill displa : To lea the t ip status, p ess...
  • Page 54 4. Use rotary to select the OPP ON or OFF followed by 5. Use numerical keys directly or use keys with rotary adjustment followed by to confirm the OPP value. 6. Press several times to exit the menu setting. 7. If the OPP is on, the OPP LED indicator will be lit up. Whe OPP p ote tio is t ipped du i g ope atio , the output ill tu off a d the follo i g OPP status essage ill displa : To lea the t ip status, p ess...
  • Page 55 4. Use rotary to select the OPP ON or OFF followed by 5. Press several times to exit the menu setting. Whe CV to CC p ote tio is t ipped du i g ope atio , the output ill off a d the follo i g CV to CC status essage ill displa : To lea the t ip status, p ess o e.
  • Page 56 Whe CC to CV p ote tio is t ipped du i g ope atio , the output ill off a d the follo i g CC to CV status essage ill displa : To lea the t ip status, p ess o e.
  • Page 57 Figu e . – DB Pi out Signal Description Open: AMODE, output button is disabled ○ BMODE, output is OFF Enable+ Short to Enable: AMODE, output button is enable BMODE, output is ON Ground Ground Open: front panel control ○ Local/Analog Short to ground: rear analog control www.valuetronics.com...
  • Page 58 Input 0-5 V / 0-5 kΩ or 0-10 V / 0-10 kΩ ○ Voltage for voltage output setting, full scale input Program equals maximum output voltage Input 0-5 V / 0- kΩ o kΩ -10 V / 0- ○ Current for current output setting, full scale input Program equals maximum output current...
  • Page 59 High: front panel controlled ○ Local/Analog State Low: rear analog controlled Ground Ground Output 0-5 V / 0-10 V represents power ○ Current supply output current, full scale input Monitor equals maximum output current E a li g/Disa li g E te al Co t ol Follo the steps elo to o figu e a d e a le the e te al o t ol i te fa e.
  • Page 60 E a le+ Pi a d E a le- Pi a e ope ed, the utto is disa led a d the po e suppl ’s output ill e ai OFF. P essi g the utto ill ot tu ON the output, a d the displa ill also sho ENA.
  • Page 61 Disable Opened ACTIVE - BMODE Shorted Disable Lo al/A alog Co t ol e used to sele t the o t ol ode lo al o a alog of the po e suppl ’s output. Whe the i put o a d fo this pi is at high le el o ope , the o t ol ode ill e lo al.
  • Page 62 Po e OK Sig al is used to i di ate hethe a fault o ditio is p ese t i the po e suppl . No all this pi ill output a logi high V . Whe a fault o u s, this pi ill output a logi lo Fault o ditio s a e defi ed as follo s: .
  • Page 63 2. Press button three times until EXTCTRL is blinking and press 3. Press button one time to select VOLTAGE and press 4. Use the rotary knob to select EXT-V (external voltage) or EXT-R (external resistance) option and press . To have front panel control, select FRONT.
  • Page 64 alue e ti g a esista e alue of - kΩ - V / - kΩ ode kΩ - V / - kΩ ode et ee Pi a d Pi as sho elo . – kΩ – kΩ Figu e . - A alog Voltage P og a i g Diag a Resisto Mode Cu e t P og a...
  • Page 65 6. Now use the rotary knob to select between 10V/10K or 5V/5K and press 7. Press several times to exit the menu setting. Voltage Mode U de oltage ode, the use o t ol the full s ale u e t output alue th ough Pi i putti g a oltage le el of - V 0-5 V / 0- kΩ...
  • Page 66 Voltage Mo ito This fu tio is a le to o ito the oltage output usi g Pi a d o e of the g ou d pi s i.e. Pi , hi h a e ted to a digital oltage ete DVM o othe oltage o ito i g de i e, as sho elo .
  • Page 67 of the g ou d pi s i.e. Pi , hi h a e ted to a digital oltage ete DVM o othe oltage o ito i g de i e, as sho elo . The output o t ol ust e i a alog ode to use this fu tio . The o ito i g of the output oltage a ge hi h efle ts to full s ale of the po e suppl ’s output oltage a...
  • Page 68 Follo the steps elo to o figu e the shut off o t ol. 1. Press the button and press the button one time until CONFIG is blinking and press 2. Press button three times until EXTCTRL is blinking and press 3.
  • Page 69 Note: Shut off a o l o u he the po e suppl e ei es a edge t igge . Mai tai i g that pi o sta tl at a high le el o lo le el ill ot t igge a shut off. EXTCTRL EXTCTRL Shutoff...
  • Page 70 Figu e . – Pa allel Co e tio Diag a Afte i i g is o plete, o figu e o e of the supplies as the Maste a d the othe th ee as “la e A, B, a d C. Afte o e of the supplies is o figu ed to e the Maste , it ill sta t sea hi g fo all “la es that a e e ted to the Maste .
  • Page 71 2. Press button four times until PARALLEL is blinking and press 3. Press to select the parallel MODE. 4. Use the rotary knob to select the setting of OFF or ON and press button one time until ROLE is blinking and press 5.
  • Page 72 I pa allel ode, the sla e u it is e ote o t olled the aste u it. The ke pad ill e lo ked. To e it the pa allel ode, p ess ke to a ess the pa allel ode ON/OFF setti g i the e u. Tu off to disa le pa allel ode o t ol.
  • Page 73 While in parallel connection mode, the output voltage of each power supply should be set to equal value. If the voltage value of each unit is not the same, the higher output voltage will feed back to the lower voltage unit and damage its internal components.
  • Page 74 effe ti e ess of the i e te ’s MPPT algo ith . Figu e . – PV Si ulatio Cu e “ola a a s o sist of ultiple sola ells ha a te ized a o ple oltage a d u e t p ofile that is ep ese ted i a I-V u e.
  • Page 75 the I-V profile. b) Manually generate the I-V curve by creating a user-defined table of points in the SAS software. Up to 1024 I-V points can be loaded to the PV“ suppl ’s o -volatile memory. O e o e of these I-V u es has ee sele ted a d set f o the f o t pa el, the po e suppl ill ope ate i PV ode a d output a oltage a d u e t alue a o di g to the a ti e I-V p ofile a d load o ditio s.
  • Page 76 3. Use the keys to move the cursor to the CURVE field and use the rotary knob to select the desired curve number. The curve number can be 1-16 or TABLE (table of up to 1024 I-V points.) 4. Once again, use the keys to move the cursor to the EDIT field and press .
  • Page 77 illust atio of ho p og a s a e st u tu ed, sto ed, a d e alled. … Repeat Program Next Program (P3) Figu e . – P og a St u tu e Illust atio Co figure Progra Para eters A tio s The p og a fu tio is used to edit a test patte o posed...
  • Page 78 Optio s Use s also ha e the a ilit to utilize the REPEAT a d NEXT PROG optio s. The REPEAT optio allo s the use to e e ute the sa e p og a as a ti es, o ti uousl , as eeded. The NEXT PROG optio allo s the use to sele t the e t p og a to e e ute o e the u e t p og a e ds.
  • Page 79 2. Use the rotary knob to select the setting of OFF or ON. 3. Use the buttons to move the cursor to the PROGRAM selection and use the rotary knob to select a program between 1-9. 4. Use the buttons to move the cursor to the EDIT selection and press .
  • Page 80 7. At this point, the user may select how many times they wish the current program to repeat in the REPEAT field, by using the keypad or the rotary knob. 8. Press to select NEXT PROG parameter and use the rotary knob to select a value of NONE or a value of 1-9.
  • Page 81 e a ple, if the , this ea s that the e a e th ee epeats of this p og a a d it is o i g the fi st epeat. 3.9 Ti e Fu tio The ti e fu tio is a ou tdo lo k, hi h allo s the use to setup ho lo g the output ill e e a led he it is i itiall tu ed ON.
  • Page 82 3. Use the buttons to move the cursor to the ON/OFF parameter and use the rotary knob to change ON or OFF. 4. Press to complete the timer setting. 5. Pressing the key will enable the output and start the timer. 3.10 Sle Rate Setti g The po e suppl has the apa ilit of o t olli g the output oltage a d u e t sle...
  • Page 83 4 Re ote Ope atio The e a e se e al i te fa es a aila le fo e ote o u i atio : U“B, R“- , GPIB, Ethe et, a d R“- . With all these i te fa es, this po e suppl is e fle i le to e o t olled e otel .
  • Page 84 1. From the SYSTEM menu, select Communication and press button three times until RS-232 is blinking and press 2. Press to configure the settings for RS-232 remote communication. The following display will be shown: 3. Use keys to select between each serial settings and press to configure the corresponding settings.
  • Page 85 Therefore, a delay between commands to let the power supply have enough time to process them is mandatory. 7. All serial settings must match the settings configured on the PC in order for communication to link successfully. GPIB Ea h odel a e o figu ed ith a GPIB add ess f o - .
  • Page 86 Follo the i st u tio s elo to sele t a d o figu e the R“- i te fa e fo e ote ope atio . Figu e . – RS- e tio Diag a fo + U its www.valuetronics.com...
  • Page 87 1. From the SYSTEM menu, browse and select Communication and press 2. Press button two times until RS-485 is blinking and press to configure the settings for RS-485 remote communication. The following display will be shown: 3. Use keys to select between each settings and press to configure the corresponding setting.
  • Page 88 more supplies have the same address, the RS485 protocols will create communication errors. 8. Repeat the above steps for each power supply that you want to connect together and control, making sure that each of them have a different address assigned. 9.
  • Page 89 5. Press to save each setting and the display will return to the LAN menu. 6. The following lists the options that can be changed for each setting: Mode: Web, Tel, Socket IP Addr: 000.000.000.000 Gway: 000.000.000.000 Mask: 000.000.000.000 We ser er The e is a e edded e se e GUI that a a ess the po e suppl ia LAN i te fa e usi g a e...
  • Page 90 Figu e . – We Se e Logi Page 6. A password is required to login and access the menu items on the page. The default admin password 123456. The e se e e u ite s a e des i ed elo : HOME The HOME page p o ides ge e al i fo atio of the po e suppl :...
  • Page 91 Figu e . – We Se e Ho e Page CONFIG The CONFIG page p o ides the p ote tio setti gs OVP, OCP, OPP, CV to CC, a d CC to CV a d output elated pa a ete s su h as oltage/ u e t slope a d li it setti gs.
  • Page 92 Figu e . – We Se e Co figu atio Page CONTROL The CONTROL page p o ides the ge e al o t ol of the po e suppl su h as output O /Off setti g as ell as the oltage a d u e t setti g.
  • Page 93 Figu e . – We Se e Co t ol Page The Log Out ill e it the e page a d go a k to logi s ee . Tel et o e tio The po e suppl e ted ia LAN Ethe et i te fa e usi g Tel et lie t ith so ket po t or 0 .
  • Page 94 4.2 Pa a ete Defi itio The PV“ po e suppl suppo ts o u i atio p oto ols, hi h i lude sta da d “CPI o a ds a d a fe p op ieta a ds that follo the “CPI o e tio .
  • Page 95 lea all e o s/e e ts f o the e o , the *CL“ o a d a used. The follo i g ta le lists all the k o e o s that a e e ou te ed. Des iptio No e o “...
  • Page 96 *RCL <NR > Re all setti g f o *R“T Reset *“AV <NR > “a e setti g to e o 4.5 SCPI Co o Su s ste “u s ste a ds a e spe ifi to fu tio s. The e a si gle a d o a g oup of o a ds.
  • Page 97 EXTV/1, mode EXTR/2 | ?> :MONitor :RANGe < 5V/0, Set or return external monitor range 10V/1 |?> :PROGram :RANGe <5V | 5K/0, Set or return external program range 10V | 10K/1 | ?> :SHUToff <Bool | ?> Set or return shut-off logic state :VOLTage :MODE <FRONt/0, Set or return voltage external control...
  • Page 98 :VOLTage? Return the measured output voltage MEMory Memory subsystem [:NUMber] <NR1 | ?> Select or return memory number, range 1-9 :ISET <NRf | ?> Set or return current value :SAVE Save memory subsystem parameters :VSET <NRf | ?> Set or return voltage value OUTput Output subsystem [:STATe] <bool | ?>...
  • Page 99 [:NUMber] <NR1 | ?> Set or return step number :ACTion <OFF/0, ON/1, Set or return step n action state NAC/2, END/3 | ?> :CURRent <NRf | ?> Set or return step n current value :ONTime <NRf | ?> Set or return step n time value :VOLTage <NRf | ?>...
  • Page 100 level PVSIMulation PV Simulation subsystem :CURVe [:NUMber] <NR1> Set the curve number n to write the parameters to :PARAMeter <NRf, NRf, Set or return the parameters (Isc, NRf, NRf Voc, Imp and Vmp) of the curve | ?> number n :SELEct <NR1 | ?>...
  • Page 101 state :LEVel <NRf | ?> Set or return over-current protection value :VOLTage [:LEVel] <NRf | ?> Set or return output voltage level :PROTection [:STATe] <Bool | ?> Set or return over-voltage protection state :LEVel <NRf | ?> Set or return over-voltage protection value SYStem System subsystem...
  • Page 102 Return the po e suppl ’s a i u :PMAX? output power :POWer Power on state :CURRent <NRf | ?> Set or return user define current value :STATe <Bool | ?> Set or return user define output state :TYPE <OFF/0, LAST/1, Set or return power on mode USER/2 | ?>...
  • Page 103 4.6 No -SCPI Re ote Co a ds These o a ds a e used fo o pati ilit ith old odel po e supplies Command Description ADDR <NR1 | ?> Set or return the GPIB address BEEP <Bool | ?> Set or return beep 0=OFF, 1=ON Clear protection status CURRent <NRf | ?>...
  • Page 104 4.7 Multi-U it P og a i g Co a ds The ulti-u it p og a i g o a ds used the po e suppl i lude a a iage etu CR ha a te fo te i atio of all A“CII st i gs.
  • Page 105 efo e usi g a of these o a ds to o t ol that u it’s output. Command Description Set the output voltage value in Volts CPV? Read the output voltage setting CMV? Read the actual output voltage Set the output current value in Amperes CPC? Read the output current setting Read the actual output current...
  • Page 106 e ted i the R“- hai at o e. Note that these o a ds ill ot etu OK st i g upo aki g a o figu atio . Command Description Reset command. Brings the power supply to a known GRST state GCLS...
  • Page 107 Status Defi e The C“T? a d ue ies the de i e status. The etu ed status is defi ed i the follo i g ta le: B te OVP ON/OFF status OCP ON/OFF status OPP ON/OFF status CC to CV p ote tio ON/OFF status CV to CC p ote tio ON/OFF status Output ON/OFF status Rese ed...
  • Page 108 Fo e a ple, if the OVP, OCP, a d OPP ON/OFF s it hes a e ON a d the output is ON, the etu alue ill e E “t i g B te B te B te 5 Cali atio B&K P e isio e ds a ali atio i te al of o e ea to e su e that the po e suppl...
  • Page 109 2. Enter the password 13579, using the numeric keypad, and press key to confirm. The following display will be shown: Belo is a list of ali atio optio s: 1. Output voltage 2. Output current 3. Overvoltage protection 4. Overcurrent protection 5.
  • Page 110 Figu e . – Voltage Cali atio Diag a 2. Set the DMM to a DC voltage measurement. Select the VOLTAGE parameter in the CAL menu and press . The following will be displayed: The P: 1/4 signifies there are 4 points to be calibrated, and the current calibration point is 1.
  • Page 111 Follo the steps elo to pe fo the u e t ali atio : 1. Connect the DMM to the output of the power supply as shown in the figure below: Figu e . – Cu e t Cali atio Diag a 2.
  • Page 112 4. Repeat this procedure by entering the meter readings for points 2 – 4. 5.3 OVP Cali atio The o e oltage p ote tio OVP ali atio e e e uted ight afte the oltage ali atio o the use a sele t OVP i the CAL e u. Follo the steps elo to pe fo the o e oltage p ote tio ali atio :...
  • Page 113 5.4 OCP Cali atio The o e u e t p ote tio OCP a e e e uted ight afte the u e t ali atio o the use a sele t OCP i the CAL e u. Follo the steps elo to pe fo the oltage ali atio : 1.
  • Page 114 5.5 E te al Voltage P og a Cali atio Follo the steps elo to pe fo the e te al oltage p og a ali atio : 1. Connect the DMM to the external analog control terminals of DB25 connector (+ on the DMM to Pins 9 and 11, - on the DMM to Pin 22 (GND)) on the rear of the power supply, as shown in the figure below: Figu e .
  • Page 115 The P: 1/2 signifies there are 2 points to be calibrated and the current calibration point is 1. 3. Input the voltage reading from the DMM in the METER parameter by using the numeric keypad and press 4. Repeat this procedure by entering the meter readings for points 5.6 E te al Cu e t P og a Cali atio Follo the steps elo to pe fo...
  • Page 116 2. Set the DMM to a DC voltage measurement. Select the EXT_CURR parameter in the CAL menu and press . The following will be displayed: The P: 1/2 signifies there are 2 points to be calibrated and the current calibration point is 1. 3.
  • Page 117 Figu e . – CC Cali atio of E te al Voltage Diag a 2. Set the DMM to a DC current measurement. Select the EXT_V_CC parameter in the CAL menu and press . The following will be displayed: 3. Input the current reading from the DMM into the METER parameter by using the numeric keypad and press 5.8 CC Cali atio of E te al Cu e t Follo the steps elo to pe fo...
  • Page 118 Figu e . – CC Cali atio of E te al Cu e t Diag a 2. Set the DMM to a DC current measurement. Select the EXT_I_CC parameter in the CAL menu and press . The following will be displayed: 3.
  • Page 119 6 T ou leshooti g Guide Belo a e so e f e ue tl asked uestio s a d a s e s. Please he k if a appl to ou po e suppl efo e o ta ti g B&K P e isio . Ge eral Q: I a ot po e up the po e suppl .
  • Page 120 Re ote Co trol Q: I a t i g to se d the o a ds o e USB/RS , ut it does ot see to espo d. Check that you are sending ASCII strings that are terminated with a CR (carriage return) and LF (linefeed) character.
  • Page 121 7 Spe ifi atio s Note: All spe ifi atio s appl to the u it afte a te pe atu e sta ilizatio ti e of i utes o e a a ie t te pe atu e a ge of °C ±...
  • Page 122 P og a i g A u a Voltage Cu e t . % + . . % + ± %output +offset Read a k A u a ± %output +offset Voltage Cu e t . % + . . % + Ge e al T a sie t Respo se ≤...
  • Page 123 Mi i u oltage is gua a teed to V. Mi i u u e t is gua a teed to a i u . % of ated output u e t. Cu e t a u a is applied he output po e > . % of full po e . Ti e fo output oltage to e o e ithi .

  • Page 124: Service Information

    SERVICE INFORMATION Warranty Service: Please go to the support and service section on our website at www.bkprecision.com to obtain a RMA #. Return the product in the original packaging with proof of purchase to the address below. Clearly state on the RMA the performance problem and return any leads, probes, connectors and accessories that you are using with the device.

  • Page 125: Limited Three Year Warranty

    LIMITED THREE YEAR WARRANTY B&K P e isio Co p. a a ts to the o igi al pu hase that its p odu ts a d the o po e t pa ts the eof, ill e f ee f o defe ts i o k a ship a d ate ials fo a pe iod of th ee ea s f o date of pu hase.
  • Page 126 “a i Ra h Pa k a Yo a Li da, CA . kp e isio . o © B&K P e isio Co p. P i ted i Tai a www.valuetronics.com...

This manual is also suitable for:

Pvs60085Pvs60085mr