Table of Contents
Advertisement
Note
The device to be connected must support the Bluetooth
manual of the device to be connected.
Multimedia
Inputs AUX-IN* and MDI*
The input AUX-IN is located below the armrest* of the front seats and is marked with
.
The input MDI is located in the front centre console.
The inputs AUX-IN and MDI connect the external audio sources (e.g. iPod or MP3
player) and play back music from these devices via your radio* or navigation system*
installed in the factory.
The description of the operation can be found in the relevant Owner's Manual of your
radio* or your navigation*.
Note
The loudspeakers in the vehicle are matched to a power output of the radio and
navigation system of 4x 20°W.
For the equipment sound system*, the loudspeakers are matched to a power
output of the amplifier of 4x40°W + 6x20 W.
Using the system
Safety
CD changer*
®
profile A2DP, see Owner's
The CD changer for the radio and navigation system is housed on the left-hand side of
the luggage compartment.
Loading a CD
– Touch the button
Load CDs
– Hold the button
Loading a CD to one definite position
– Press on the button
– Touch the desired button
Ejecting a CD
– Briefly press on the button
– Touch the corresponding button
Driving Tips
General Maintenance
A
fig. 122
and guide the CD (compact disc) into the CD-case
A
A
. The CD is automatically loaded onto the next free position in the CD-changer.
B
The LED in the corresponding button
A
pressed and guide the CDs one after the other (maximum
A
A
6 CDs) into the CD case
. The LEDs in the buttons
B
A
. The LEDs in the buttons
A
which are already assigned and flash in the case of free memory spaces.
A
and guide the CD into the CD-case
D
A
, in order to eject a CD. For assigned memory spaces,
C
now the LEDs light up in the buttons
A
. The CD is ejected.
D
Breakdown assistance
Communication
Fig. 122 The CD changer
A
stops flashing.
D
A
are no longer flashing.
D
A
light up at the memory spaces,
D
A
.
B
A
.
D
Technical Data
135
Advertisement
Table of Contents
