Skoda YETI - 05-2010 Owner's Manual page 232

Front towing eye
The towing eye is stored in the box for the vehicle tool kit.
Fig. 182 Front bumper: Removing the cover / installing the towing eye
– Press on the upper half of the cover in direction of arrow
– Pull the cover out of the front bumper.
– Screw in the towing eye by hand to the left up to the stop
tighten it as much as possible. For tightening, we recommend that you use for
example the wheel wrench*, the lashing eye of another vehicle or a similar object
which you can push through the eye.
– In order to reinstall the cover after screwing out the towing eye, first of all insert the
upper part of the cover and then press in the lower part. The cover must engage
firmly.
Caution
The towing eye must always be screwed in fully and firmly tightened, otherwise the
towing eye can tear when towing in or tow-starting!
Using the system Safety
Rear towing eye
Fig. 183 Rear bumper: Removing the cover / installing the towing eye
– Press on the upper half of the cover in direction of arrow
A  fig.
182.
– Take the cover out of the rear bumper
1
– Screw in the towing eye by hand to the left up to the stop
 fig. 182
- right and
– In order to reinstall the cover after screwing out the towing eye, first of all insert the
The towing eye must always be screwed in fully and firmly tightened, otherwise the
towing eye can tear when towing in or tow-starting!
Towing in a vehicle fitted with a manual gearbox
Please refer to the additional instructions  page 230.
The vehicle can be towed in with a tow bar or a tow rope or with the front or rear
wheels raised. The maximum towing speed is 50 km/h.
Driving Tips General Maintenance
tighten it as much as possible. For tightening, we recommend that you use for
example the wheel wrench*, the lashing eye of another vehicle or a similar object
which you can push through the eye.
upper part of the cover and then press in the lower part. The cover must engage
firmly.
Caution
Breakdown assistance
Breakdown assistance
A  fig.
183.
1
 fig. 183
- left.
 fig. 183
- right and
Technical Data
231