Skoda YETI - 05-2010 Owner's Manual page 120

Table of Contents

Advertisement

Changing a stored speed
You can also change the speed of the vehicle without depressing the
accelerator.
Faster
– You can increase the stored speed without depressing the accelerator, by pressing
A
 fig. 114
the rocker button
B
– The speed of the vehicle will increase continuously if you hold the rocker button
pressed in the RES position. Once the vehicle has reached the desired speed,
release the rocker button. The set speed is then stored in the memory.
Slower
– You can decrease the stored speed by pressing the rocker button
position.
– Holding down the rocker button pressed in the SET position will cause the speed
of the vehicle to reduce continuously. Once the vehicle has reached the desired
speed, release the rocker button. The set speed is then stored in the memory.
– If you release the rocker button when the vehicle is travelling at a speed of less than
30 km/h, the speed is not stored, the memory is erased. It is then necessary to again
store the speed with the rocker button
speed of the vehicle to more than 30 km/hour.
Switching off the cruise control system temporarily
– You can switch off the cruise control system temporarily by depressing the brake
pedal or clutch pedal, on vehicles fitted with an automatic gearbox only with the
brake pedal.
– You can switch off temporarily the cruise control system, if you press the switch
in the middle position.
The set speed remains stored in the memory.
The Resumption of the stored speed is achieved by releasing the brake or clutch
pedal, on vehicles fitted with automatic gearbox only after releasing the brake pedal
Using the system
Safety
in the RES position.
A
B
A
in the position SET after an increase in
B
Driving Tips
and after shortly pressing the rocker button
RES.
WARNING
First ensure that it is not too high for the traffic conditions which exist at that
moment before resuming the stored speed.
Switching off the cruise control system completely
– Press the switch
in the SET
A
A
General Maintenance
Starting-off and Driving
A
 page 118, fig. 114
B
A
 page 118, fig. 114
to the right into position OFF.
A
Breakdown assistance
119
into the position
Technical Data

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yeti

Table of Contents