Variable Loading Floor In The Luggage Compartment - Skoda YETI - 05-2010 Owner's Manual

82 Seats and Stowage

Variable loading floor in the luggage compartment*

Remove variable loading floor
Fig. 74 Luggage compartment: Fold up variable loading floor / remove
The variable loading floor makes it easier to handle bulky goods and creates an even
luggage compartment floor when the rear seat backrests are folded forward. The
maximum permissable surface load of the variable loading floor is 75 kg.
Removing the variable loading floor
– You can fold together the loading floor by moving it in direction of arrow
 fig.
74.
– Raise the variable loading floor in direction of arrow
– Pull on both sides of the locking levers in direction of arrow
– Pull the variable loading floor up and out in direction of arrow
– The installation of the variable loading floor is carried out in the reverse order.
Secure the variable loading floor in the raised position
– Fold up the hooks on the fastening strip in direction of arrow
– Fold up the variable loading floor behind the seat backrests of the rear seats.
– Fold down the hooks in direction of arrow
– Support the variable loading floor on the hooks folded downwards.
A
1
 fig.
A
74.
2
A  fig.
74.
3
A
.
4
A  page 79, fig.
70.
1
 page 79, fig. 70
A
as far as the stop.
3
WARNING
Pay attention when installing the variable loading floor that the carrier rails and
the variable loading floor are correctly fixed, otherwise the occupants are at
risk.
Note
If the variable loading floor* is installed, no flexible storage compartment can be
installed.
Remove carrier rails
Fig. 75 Luggage compartment: Slacken check points / remove carrier rails
Remove carrier rails
A  fig. 75
– Slacken the check points
B
flat screwdriver.
A
– Grasp the carrier rail at the position
A
direction of the arrow.
A
– Grasp the carrier rail at the position
A
the arrow and take it out.
– The carrier rail on the other side of the luggage compartment can be removed in
the same way.
on the carrier rails using the vehicle key or a
A  fig. 75
and slacken it by pulling in the
1
A
, slacken it by pulling in the direction of
2