Skoda YETI - 05-2010 Owner's Manual page 28

Table of Contents

Advertisement

On vehicles with rain sensor you can switch on or off the
function for automatic closing of the windows and the
Rain closing
sliding/tilting roof in case of rain and locked vehicle. If it is
not raining and the function is set, the windows including
the sliding/tilting roof are closed automatically after
approx. 12 hours.
Door open
Here you can switch on or off the functions for opening a
single door and automatic closing.
Here you can set if a signal tone should sound additionally
ATA confirm
when activating or deactivating the anti-theft alarm system
.
Window op.
Here you can set the convenience mode only for the driver
window or for all the windows.
Here you can switch on or off the function for mirror low-
Mirror down
ering on the front passenger side when engaging the
reverse gear
Mirror adjust.
Here you can switch on or off the function for left and right
exterior mirror adjustment simultaneously.
After selecting this menu the convenience setting is reset
to factory setting. The following is displayed in the infor-
Factory setting
mation display:
Convenience factory settings restored
a)
This function is only available on vehicles with an electrically adjustable driver seat.
Lights and Visibility
Here you can set how long the light should stay on for the function Coming/Leaving
Home. Furthermore you can here switch on or off the functions daylight driving lights
and convenience turn signal.
After selecting the menu Factory setting the factory setting is established again.
After selecting the menu point travel mode, you can activate / deactivate the mode
"tourist light". This mode makes it possible to drive in countries with opposing traffic
system, driving on the left/right, without dazzling the oncoming vehicles. The headlight
Using the system
Safety
a)
.
Driving Tips
swivel function is deactivated when switching on this mode. Further information
 page 56.
Time
Here you can set the time, the time format (12 or 24 hour indicator) and the time
change summer/winter time.
Winter tyres
Here you can set at which speed a warning signal should sound. This function is used
for e.g winter tyres with the permissible maximum speed less than the maximum
speed of the vehicle.
When exceeding the speed, the following is displayed on the information display*:
Winter tyres: max. speed ... km/h
Measures
Here you can set the units for temperature, consumption and distance driven.
Assistant
Here you can adjust the tones of the acoustic signals of the parking aid*.
Second speed
Here you can switch on the display of the second speed in mph or in km/h
Service
Here you can have the kilometers still to be driven and the days until the following
service interval shown and the Service Interval Display reset.
Factory Setting
After selecting the menu Factory Setting the factory setting of the information display
is established again.
2)
Valid for countries where the values are indicated in British measuring units.
General Maintenance
Breakdown assistance
Instruments and warning lights
2)
.
Technical Data
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yeti

Table of Contents