Skoda YETI - 05-2010 Owner's Manual page 240

Table of Contents

Advertisement

Main beam light and low beam light
– Switch the ignition and all lights off.
– Turn the protective cap in direction of arrow OPEN
remove it.
A
– Unplug plug
.
A
A
– Press the wire clamps
down until they are released from the secured position.
B
A
– Remove the light bulb
and insert the new light bulb in such a way that the fixing
C
lugs of the light bulb socket fit into the recesses at the reflector.
Installation takes place in the reverse order.
Note
We recommend that you have the headlight setting checked by a Skoda Service
Partner after replacing the light bulb.
Using the system
Safety
Fig. 191 Removing the bulb for the main
beam light and low beam light
 page 238, fig. 189
and
Driving Tips
Fog lights*
Removing the bulb for the fog light
– Switch the ignition and all lights off.
– Remove the rubber protective cap
A
– Unplug plug
.
1
– Take the faulty bulb out of the fixture
and insert a new one.
– Insert the protective cap.
Daylight driving lights
Remove the bulb for daylight driving lights
– Switch the ignition and all lights off.
General Maintenance
Breakdown assistance
Fuses and light bulbs
Fig. 192 Removing the bulb for the fog
light
A
 page 238, fig.
188.
A
A
by pressing the light socket downwards
2
Fig. 193 Remove the bulb for daylight
driving lights
Technical Data
239

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yeti

Table of Contents