Skoda SUPERB - 05-2010 Owner's Manual page 77

Table of Contents

Advertisement

76
Lights and Visibility
Replacing wiper blades for the windscreen wipers
One cannot fold out the wiper arms in the rest position from the windscreen. Before
replacing the wiper arms you must put them into the service position.
Service position for changing wiper blades
– Close the bonnet.
– Switch the ignition on and then again off.
– Then press the windscreen wiper lever in the position
10 seconds - the wiper arms move into the service position.
Taking off the wiper blade
– Fold windscreen wiper arm away from the windscreen.
A
– Press the locking button
, in order to unlock the wiper blade and pull off in the
1
A
 fig.
direction of arrow
64.
2
Attaching a wiper blade
– Push the wiper blade until it locks up to the stop.
– Check whether the wiper blade is correctly attached.
– Fold the windscreen wiper arm back onto the windscreen.
The wiper arms move back into the rest position - after switching on the ignition and
after changing the position of the window wiper lever or when driving at a speed
greater than 6°km/h.
Fig. 64 Wiper blade for the windscreen
wiper
A
 page 73, fig. 63
within
4
Wiper blades in proper condition are essential to obtain good visibility. Wiper blades
should not be allowed to become dirtied by dust, insect remains and preserving wax.
Juddering or smearing of the wiper blades could then be due to wax residues left on
the windscreen by vehicle washing in automatic vehicle wash systems. It is therefore
important to degrease the lips of the wiper blades after every pass through an auto-
matic vehicle wash system.
WARNING
If the windscreen wipers are handled carelessly, there is a risk of damage to
the windscreen.
You should clean the wiper blades regularly with a windscreen cleaner in
order to avoid any smears. Clean a wiper blade with a sponge or cloth if it is very
dirty, for example from insect residues.
Replace the wiper blades once or twice a year for safety reasons. These can
be bought from an authorised Škoda Service Partner.
Replacing the wiper blade for rear window (Combi)
Taking off the wiper blade
– Fold windscreen wiper arm out from the windscreen and position the wiper blade
 fig.
at right angles to the wiper arm
– Hold the window wiper arm at the top end with one hand.
– With the other hand unlock the locking button
A
the direction of arrow
.
2
Fig. 65 Wiper blade for rear window
65.
A
and remove the wiper blade in
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superb

Table of Contents