Skoda SUPERB - 05-2010 Owner's Manual page 63

Table of Contents

Advertisement

62
Lights and Visibility
Rain lights
If you move the windshield wiper lever in the position slow wipe for more than 5
seconds, the side lights and low beam are automatically switched on. The light is
switched off when the windshield wiper lever is no longer than 4 minutes in the posi-
tion for slow or intermittent wipe.
If you switch on the windscreen wipe in the operation rain sensor* for longer than 10
seconds or in the operation permanent wipe (position 2 or 3)  page 73 switching on
for longer than 15 seconds, the side lights and low beam are switched on automati-
cally. The light switches off if the windscreen wipe is in operation rain sensor* for more
than 4 minutes or is not switched on in the operation permanent wipe.
WARNING
The automatic light control only operates as a support. The driver is not
released from his responsibility to inspect the light and if necessary to switch on
the light depending on the light conditions. The light sensor cannot detect for
example rain or snow. For these conditions we recommend to switch on the low
beam
!
Note
Do not affix any stickers in front of the light sensor, so that you do not impair its
function or put it out of operation.
The same principles as for using the automatic light control also apply to the light
which is switched on manually  page 60.
Coming Home Function
The function makes it possible to switch on the lights in the darkness for a short time
after leaving the vehicle.
Switching on Coming Home Function
– The light switch is in the position automatic driving lamp control
beam illuminates.
– Switch off the ignition.
– After opening the driver's door, the function Coming Home is switched on.
– Close all the doors and the boot lid and lock the vehicle. After a short time, switch
all lights off.
Depending on equipment fitted the function Coming Home switches on the following
lights:
Parking lights,
Low beam,
Entry lighting in the exterior mirrors,
Licence plate light.
Coming Home Function
The lights go out 10 seconds after closing all the doors and the boot lid.
If a door or the boot lid remains open, the lights go out 60 seconds after switching off
the ignition.
On vehicles fitted with automatic driving lamp control you can also switch the light
switch in the position
sensor in the mount of the interior rear mirror. If the light intensity is higher than the
set value of the light sensor, the Coming Home Function is not switched on after
switching off the ignition.
Note
If the Coming Home Function is switched on constantly, the battery will be heavily
discharged particularly in short-haul traffic.
The switching on of the described lights should only be undertaken in accordance
with the legal requirements.
You can change the illumination period for the Coming Home Function by means
of the information display*.
Leaving Home Function

and the low
This function makes it possible to switch on the lights when approaching the vehicle.

. The function Coming Home is controlled with the light

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superb

Table of Contents