Skoda SUPERB - 05-2010 Owner's Manual page 22

Setting function to zero
– Select the memory you want.
A A
– Press the button or
B D
The following readouts of the selected memory will be set to zero with the button
on the windshield wiper lever or with the button
wheel:

average fuel consumption,

distance driven,

average speed,

Driving time.
You can only operate the multi-functional indicator when the ignition is switched on.
After the ignition is switched on, the function displayed is the one which you last
selected before switching off the ignition.
Outside temperature
The outside temperature appears in the display when the ignition is switched on.
If the outside temperature drops below +4 °C, a snow flake symbol (warning signal for
ice on the road) appears before the temperature indicator and a warning signal
sounds. After pressing the rocker switch
A  page 20, fig. 19
lever or the button
C
function shown last is indicated.
WARNING
Do not only rely upon the information given on the outside temperature display
that there is no ice on the road. Please note that black ice may also be present
on the road surface even at temperatures around +4°C - warning, drive with
care!
Driving time
The driving time which has elapsed since the memory was last erased, appears in the
display. If you wish to measure the driving time as of a particular time, you must set the
Using the system Safety
for more than 1 second.
A
on the multifunction steering
D
A  page 20, fig. 19
on the windshield wiper
A
on the multifunction steering wheel*, the
Driving Tips
memory to zero at this moment in time by pressing the button
on the windshield wiper lever or the handwheel
function steering wheel* for longer than 1 second.
The maximum time indicated in both memories is 19 hours and 59 minutes and on
vehicles which are fitted with information display*, it is 99 hours and 59 minutes. The
A
B
indicator is set back to null if this period is exceeded.
Current consumption
The current fuel consumption level is shown in the display in litres/100 km. This infor-
mation can help you to adapt your style of driving to the fuel consumption you wish to
achieve.
The display appears in litres/hour if the vehicle is stationary or driving at a low speed.
The indicated value will be updated every 0.5 seconds while you are driving.
Average fuel consumption
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km  page 19. This information can help you to adapt your style
of driving to the fuel consumption you wish to achieve.
If you wish to determine the average fuel consumption over a certain period of time
you must set the memory to zero at the start of the measurement using the button
on the windshield wiper lever
multifunction steering wheel*
first 100 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Note
The amount of fuel consumed will not be indicated.
General Maintenance
Instruments and warning lights
A
B
A  page 20, fig. 19
D
 page 20, fig. 19
or with the handwheel
 page 20, fig.
19. A zero appears in the display for the
Breakdown assistance Technical Data
21
 page 20, fig. 19
on the multi-
A
B
A
on the
D