Skoda SUPERB - 05-2010 Owner's Manual page 257

256 Fuses and light bulbs
A A
Changing bulbs and in the rear light unit
2 4
– Turn the socket with the bulb to the left up to the stop and take it out of its housing.
– Press in the defective bulb, turn it to the left up to the stop and take it out.
– Insert a new bulb into the socket, press it in and turn the bulb to the right up to the
stop.
– Insert the socket with the new bulb into the housing and turn it to the right up to
the stop.
 page 255, fig.
Fitting position of the bulbs
A
- Parking lights / Reversing light
1
A
- Reversing light
2
A
- Turn signal lights
3
A
- Parking lights / Brake light
4
A
- Parking lights
5
Caution
When removing and installing the rear light unit make sure not to damage the paint-
work of the vehicle and the rear light unit.
Licence plate light
– Unscrew the glass cover of the light
216.
Fig. 217 Rear bumper: Licence plate
light
 fig.
217.
– Take the defective bulb out of the holder and insert a new one.
– Replace the glass cover of the lamp and press it down to the stop - ensure that the
glass cover is correctly installed.
– Screw the glass cover tight.
Licence plate light (Combi)
– Insert a flat screwdriver into the opening at the point of the arrow
carefully press towards the centre of the lamp, by doing so the lamp slightly jumps
out.
– Take out the lamp.
– Take the defective bulb out of the holder and insert a new one.
– Replace the glass cover of the lamp and press it down to the stop - ensure that the
glass cover is correctly installed.
Fig. 218 Luggage compartment door
Licence plate light
 fig. 218
and