Create Wind Stylance Assembly Manual page 17

4
Follow the same step with the second and third blades E.
Remember not to screw in the screws completely.
STEP 5. PLACING THE DECORATIVE ELEMENT
N
SCREWS +
DECORATIVE ELEMENT
1
Using a screwdriver, remove the 3 center screws from the
motor for later use.
5
+
2
E
6
Once all the blades E are in
place, screw all the screws
L tightly so that the blades
are well attached.
3
L
Pass the
through the center hole of
piece N.
motor wires
ENGLISH 17