Create Wind Stylance Assembly Manual page 15

4
Join the connections in piece B to those in the motor, each
with its corresponding color.
7
Select and connect all the
grounding wires together,
including the one from your
own house wiring.
10
Connect the L wire from the
driver with the LINE wire
from your house wiring.
5
8
Once connected, place
piece O screwing it until it
is well tighten.
11
Connect the N wire from the
driver with the neutral wire
from your house wiring.
6
Once the wires are connec-
ted, insert piece B inside
piece K, as shown in the
image.
9
O
Then, you have to join the
remaining wires of piece B
and the line and neutral wi-
res from your house wiring
in the block terminal in piece
K, as shown below.
12
Make sure the wires aren't
pinched.
ENGLISH 15