Setting Passwords - Freecom SUPERLOADER3 LTO2-HH Manual

Setting Passwords5
To set the number of magazines:
1 From the main menu, scroll to
2 From the
Configuration
.
Enter
3 From the
Magazines
the magazines installed in the autoloader.
Many operations on the autoloader are password-protected to ensure
data integrity. You can set passwords to administrator level and to
operator level. Operator-level users have access to the
menus. Administrator-level users have access to all functionality.
Status
To set a password:
1 From the main menu, scroll to
2 From the
Configuration
.
Enter
3 To set a password to the operator level, scroll to
password to the administrator level, scroll to
press . The
Enter Set Password
4 Press . If you are not logged in as Administrator, press
Enter
again to log in. A text box appears above the first asterisk.
In the text box, scroll to the first character of the password. The cursor
automatically appears at the first number of the password.
5 At each position of the password, use the up and down arrows to
change the value of each number. Press
the next number.
Note: If you make a mistake, press
digit you want to change.
6 Press . The text box above the asterisk disappears and another
Enter
text box appears above the next asterisk.
7 Repeat steps 5 and
When you have entered six numbers, the autoloader displays
below the asterisks.
Password
SuperLoader 3 Autoloader User's Guide
Configuration
menu, scroll to
Magazines
menu, select either
Right
Configuration
menu, scroll to
Set Password
screen appears.
Enter
Escape
6 to enter the remaining digits of the password.
Chapter 5 Administration
Setting the Change Mode
, and then press
Enter
, and then press
, , or to indicate
Left Both
and
Commands
, and then press
Enter
, and then press
. To set a
Operator
, then
Administrator
Enter
to advance the cursor to
to backspace to the
Submit
.
.
71