Freecom SUPERLOADER3 LTO2-HH Manual page 69

7 Click .
submit
Note: To view the list of currently defined users, click
with
Select User Type
To set the
Client Authorization Control
1 From any page, click the
screen displays.
2 On the left-hand side of the screen, click
Scroll to
Client Authorization Control
addresses that are authorized to perform functions using On-board
Remote Management for this specific unit. There are two sets of IP
address boxes. You can individually enable/disable and configure
each set.
• If enabled, each set can be used to specify either a range of IP
addresses or a pair of specific IP addresses that are allowed to
administer this unit. A set can also be used to specify a single IP
address if the desired IP address is entered into both the "a" and
"b" portions of the set. When a set is used to specify a range of IP
addresses, the "b" portion of each address set must be greater
than or equal to the "a" portion of that address set.
• If neither set is enabled, any IP client can administer the unit. If a
single set is enabled, only clients that pass the test specified by
that set are allowed administrator access. If both sets are enabled,
any client that passes either of the two filter tests can administer
the unit.
The Web server always allows any client to view the status
information of the unit, regardless of the authorized client list or the
overlap control policy.
3 Use the drop-down box to select
4 Type the IP addresses in the appropriate boxes.
5 Click to save.
submit
Client Overlap Control
Web server handles overlapping control requests from multiple clients on
the authorized client list. The options include
and
Time-Based Locking
SuperLoader 3 Autoloader User's Guide
Chapter 4 On-board Remote Management
.
:
heading. The
Configuration
. In this section is a list of the IP
Enable
is a management policy on controlling how the
.
Configuration Page
submit
Configuration
.
Security
or .
Disabled
,
No Locking Full Locking
,
51